where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

2019 views
Technical Discussions
Cesar Boynard
R & D
Instituto de Soldadura e Qualidade, Portugal, Joined Dec 2002, 11

Cesar Boynard

R & D
Instituto de Soldadura e Qualidade,
Portugal,
Joined Dec 2002
11
07:09 Dec-12-2002
EMAT device

I am looking for companies that can provide EMAT´s equipments.
I´d appreciate if someone can help me.
Thanks in advance.
My kind regards

Cesar


 
 Reply 
 
Borja Lopez
Borja Lopez
07:29 Dec-12-2002
Re: EMAT device
check www.innerspec.com


: I am looking for companies that can provide EMAT´s equipments.
: I´d appreciate if someone can help me.
: Thanks in advance.
: My kind regards
.
: Cesar
.



 
 Reply 
 
Grant Gordon
R & D
McDermott Technology, USA, Joined Jun 2002, 1

Grant Gordon

R & D
McDermott Technology,
USA,
Joined Jun 2002
1
07:55 Dec-12-2002
Re: EMAT device
Cesar:
McDermott Technology Inc. and our sister organization BWXT Services has a long history of designing application specific EMAT solutions for various commercial and military customers. For more information please see our web page http://www.mtiresearch.com/nde.html




 
 Reply 
 
Cesar Boynard
R & D
Instituto de Soldadura e Qualidade, Portugal, Joined Dec 2002, 11

Cesar Boynard

R & D
Instituto de Soldadura e Qualidade,
Portugal,
Joined Dec 2002
11
07:57 Dec-12-2002
Re: EMAT device
I have sended several e-mails to them, but so far, any reply.
: check www.innerspec.com
.
:
: : I am looking for companies that can provide EMAT´s equipments.
: : I´d appreciate if someone can help me.
: : Thanks in advance.
: : My kind regards
: .
: : Cesar
: .
.



 
 Reply 
 
Joe Buckley, Sonatest PLc
Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT, United Kingdom, Joined Oct 1999, 528

Joe Buckley, Sonatest PLc

Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT,
United Kingdom,
Joined Oct 1999
528
08:10 Dec-12-2002
Re: EMAT device
Can you give us some more information on your application?

There are quite a few types of EMAT technology available- Most companies specialise in a subset of it.

e.g. at sonatest (http://www.sonatest-plc.com ) we supply flaw detectors and probes which are optimised for EMAT inspection of high temperature (e.g. boiler) service tubing.

Other companies make EMATS for other situations.

Joe


: I am looking for companies that can provide EMAT´s equipments.
: I´d appreciate if someone can help me.
: Thanks in advance.
: My kind regards
.
: Cesar
.



 
 Reply 
 
Cesar Boynard
R & D
Instituto de Soldadura e Qualidade, Portugal, Joined Dec 2002, 11

Cesar Boynard

R & D
Instituto de Soldadura e Qualidade,
Portugal,
Joined Dec 2002
11
08:25 Dec-12-2002
Re: EMAT device
::The company that I work with, ISQ, usually aplly several services of NDT(RT,UT,PT,MT,etc), in a wide range of equipment(Boilers, pipeline, heat exchanger etc), in general for chemichal and petrochemical industries. The requirements are, in general, measurements reduction and Flaws detection.
So we are looking for emat´s devices/probes that can supply such requirements and adapted to our ultrasonic equipments, if possible.

my regards
Cesar Boynard

: Cesar:
: McDermott Technology Inc. and our sister organization BWXT Services has a long history of designing application specific EMAT solutions for various commercial and military customers. For more information please see our web page http://www.mtiresearch.com/nde.html
.



 
 Reply 
 
Cesar Boynard
R & D
Instituto de Soldadura e Qualidade, Portugal, Joined Dec 2002, 11

Cesar Boynard

R & D
Instituto de Soldadura e Qualidade,
Portugal,
Joined Dec 2002
11
08:29 Dec-12-2002
Re: EMAT device
::Joe,
Thanks for your reply.
The company that I work with, ISQ-Portugal, usually aplly several services of NDT(RT,UT,PT,MT,etc), in a wide range of equipment(Boilers, pipeline, heat exchanger etc), in general for chemichal and petrochemical industries. The requirements are, in general, measurements reduction and Flaws detection.
So we are looking for emat´s devices/probes that can supply such requirements and adapted to our ultrasonic equipments, if possible.

my regards
Cesar Boynard

: Can you give us some more information on your application?
.
: There are quite a few types of EMAT technology available- Most companies specialise in a subset of it.
.
: e.g. at sonatest (http://www.sonatest-plc.com ) we supply flaw detectors and probes which are optimised for EMAT inspection of high temperature (e.g. boiler) service tubing.
.
: Other companies make EMATS for other situations.
.
: Joe
.
.
:
: : I am looking for companies that can provide EMAT´s equipments.
: : I´d appreciate if someone can help me.
: : Thanks in advance.
: : My kind regards
: .
: : Cesar
: .
.



 
 Reply 
 
Cesar Boynard
R & D
Instituto de Soldadura e Qualidade, Portugal, Joined Dec 2002, 11

Cesar Boynard

R & D
Instituto de Soldadura e Qualidade,
Portugal,
Joined Dec 2002
11
02:47 Dec-13-2002
Re: EMAT device
::Our especific range of applications are: thickness (5 up to 10 mm), material (carbon steel), Minimal Flaw sizing (0,5 mm), for on-site inspections.
We usually work with Krautkramer equipments, but if your devices can not be adapted to our equipments, there is no problem. So, you can send me a full quotation for complete system(Probe, hardware, software,etc).

my kind regards


: I am looking for companies that can provide EMAT´s equipments.
: I´d appreciate if someone can help me.
: Thanks in advance.
: My kind regards
.
: Cesar
.



 
 Reply 
 

Product Spotlight

On Demand Webinar: Using Eddy Current Array for Large Areas in Place of Magnetic Particle and Liquid Penetrant Testing

New on-demand webinar on the use of eddy current array (ECA) technology in lieu of liquid penetrant
...
testing (PT) and magnetic particle testing (MT) for large area screenings. The webinar includes an introduction to the technologies with advantages and disadvantages of each. Side by side examples are discussed including aircraft stringers, engine blades, forgings, weld plates & more. View it today.
>

GUL Subsea Solutions - Screeening & Monitoring

To inspect new and existing subsea lines, you need proven technology and experience. GUL offers it's
...
technology to solve this challenge: GUL Subsea and gMAT Transducer Rings.
>

HD-CR 35 NDT Computed Radiography System

Portable high-resolution CR scanner for all radiography applications - weld testing, profile images
...
and aerospace. No matter what type of radiographic testing you are performing, the unique TreFoc Technology of the HD-CR 35 NDT imaging plate scanner always guarantees the highest image quality.
>

VeeScan AirCraft Wheel Inspection

The VEESCAN offers maximum flexibility, has a proven mechanical design and records of breakdown-fr
...
ee operation of over 365 days. Appealing to companies in the Aerospace industry, the VEESCAN is ideal for all wheel-testing environments. With a wide selection of probes, the VeeScan allows your wheel testing facility the flexibility to select the most compatible configurations with their workload.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window