where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
14169 views
Career Discussions
Ed Ginzel
R & D, -
Materials Research Institute, Canada, Joined Nov 1998, 1300

Ed Ginzel

R & D, -
Materials Research Institute,
Canada,
Joined Nov 1998
1300
12:05 Feb-17-2014
Obituary - Michael D.C. Moles 1948-2014

Michael D.C. Moles 1948-2014

Michael Moles, a long-time member of the NDT community, died of cancer, 13 February 2014 in Toronto.

Born in the UK, Michael was educated at the University of Cambridge (PhD Physical Metallurgy 1972). He completed an M.B.A. from McMaster University in 1984 and was a member of the Professional Engineers of Ontario. From 1972 until 1974 Michael worked in Zambia then moved to Canada in 1975. From 1977 until 1996 Michael worked for Ontario Hydro Research Division where he held a variety of positions in the NDE department including research scientist and acting Section Head. From 1997 until 2013 he was with Olympus NDT (formerly R/D Tech).

Over his nearly 40 year career in NDT, Michael contributed over 150 technical papers and reports at conferences and invited presentations. He was a technical editor of several books including the English translation of the Japanese Tip Echo Handbook, First edition by Prof. Harumi in 1989, Introduction to Phased Array Technology Applications by R/D Tech, 2004, Automated Ultrasonic Testing for Pipeline Girth Welds, by Ed Ginzel, 2006, Advances in Phased Array Ultrasonic Technology Applications, Olympus NDT, 2007 and IIW handbook on “Phased Arrays for Weld Inspections”, 2012.

Dr. Moles was an Adjunct Professor at the University of Toronto, Department of Mechanical and Industrial Engineering, where he co-supervised students working on accurate crack sizing using digital signal processing. He was also a co-instructor on a graduate course on advanced ultrasonic inspection techniques.

Michael will be remembered as an active and enthusiastic member of the NDT community. His memberships included ASME, ASTM, AWS, ASNT and CINDE. He was a committee member with several organisations working on ultrasonic testing.

Since 2005, Michael - www.ndt.net/myndt/profile.php?id=2302 - was an active contributor to NDT.net, with 46 papers that he has authored or co-authored as well as the much-viewed webinar on the forum on the “Benefits of phased array for weld inspection” www.ndt.net/forum/thread.php?nc=1&rootID=31269

Michael was a man who valued fairness. He was an egalitarian at heart and would often support the underdog, even taking on minor crusades against the “system” and its perceived inequalities. He was always ready to lend a helping hand as seen by his numerous contributions to the NDT.net forum.
Michael Moles will be missed by all of us in the NDT community, a community that he was such a vibrant part of.

1
 
 Reply 
 
Rolf Diederichs
Director,
NDT.net, Germany, Joined Nov 1998, 616

Rolf Diederichs

Director,
NDT.net,
Germany,
Joined Nov 1998
616
12:47 Feb-17-2014
Re: Obituary -  Michael D.C. Moles 1948-2014
In Reply to Ed Ginzel at 12:05 Feb-17-2014 (Opening).








The video shows only 5 minutes of the talk.

[5' video - 45 MB mp4]


[Paper and Powerpoint]



Ed,

Thank you so much for writing such a beautiful rememberance of Michael. And especially for including some of his activities here in NDT.net.

I personally met Michael the last time at the WCNDT 2012 in Durban and I feel now lucky that I recorded a video of one of his presentations, at least partially.

Michael, you will be greatly missed and not forgotten.

Rolf
 
 Reply 
 
Stan
NDT Inspector,
Canada, Joined Jan 2009, 31

Stan

NDT Inspector,
Canada,
Joined Jan 2009
31
13:33 Feb-17-2014
Re: Obituary - Michael D.C. Moles 1948-2014
In Reply to Ed Ginzel at 12:05 Feb-17-2014 (Opening).

Thanks for this obituary Ed.
I met Michael a couple of times, had a few email conversations with him and read several of his papers. His knowledge and insight around ultrasonics and especially phased array will be missed.
Mt condolences to his family and friends
Stan

 
 Reply 
 
Joe Buckley
Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT, United Kingdom, Joined Oct 1999, 528

Joe Buckley

Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT,
United Kingdom,
Joined Oct 1999
528
14:06 Feb-17-2014
Re: Obituary - Michael D.C. Moles 1948-2014
In Reply to Ed Ginzel at 12:05 Feb-17-2014 (Opening).

Ed

Many Thanks for posting this, I was really sorry to hear about Michael's death, He has been a friend for many years. A couple of years back I had the honour of preparing his citation for the BINDT Nemet Prize, which we awarded for his long contribution in advancement of NDT. I had a long talk about his background, and learnt much impressed me even more.

I last saw Michael and his wife in Brazil last year, at the time it seemed like he was getting better, a great shame this was not the case.

In our industry he was one of the greats. He will be sadly missed.

 
 Reply 
 
Danfer De la cruz
Engineering
Peru, Joined Jun 2009, 11

Danfer De la cruz

Engineering
Peru,
Joined Jun 2009
11
14:54 Feb-17-2014
Re: Obituary -  Michael D.C. Moles 1948-2014
In Reply to Ed Ginzel at 12:05 Feb-17-2014 (Opening).

Thanks for this obituary Mr. Ed.
I read several of his papers. His knowledge and insight around ultrasonics and phased array will be missed.
Good by Mr. Moles.

Danfer De la Cruz.
Lima - Peru.

 
 Reply 
 
Farhang Honarvar
Other, Professor
K. N. Toosi University of Technology, Iran, Joined Aug 2010, 3

Farhang Honarvar

Other, Professor
K. N. Toosi University of Technology,
Iran,
Joined Aug 2010
3
15:06 Feb-17-2014
Re: Obituary - Michael D.C. Moles 1948-2014
In Reply to Ed Ginzel at 12:05 Feb-17-2014 (Opening).


Dear Ed,

It is very sad to hear that Michael has passed away. I would like to extend my sincere condolences to you and other friends and his family. He was a very nice man and I always enjoyed working and discussing with him. May his soul rest in peace.

Farhang

 
 Reply 
 
Manuel Haces
Director, - Wire rope inspection
Haces Inspección del Noreste and Wire Rope Inspection, Mexico, Joined Jun 2002, 124

Manuel Haces

Director, - Wire rope inspection
Haces Inspección del Noreste and Wire Rope Inspection,
Mexico,
Joined Jun 2002
124
16:20 Feb-17-2014
Re: Obituary - Michael D.C. Moles 1948-2014
In Reply to Ed Ginzel at 12:05 Feb-17-2014 (Opening).

Sorry for such notice. May he rest in peace.

 
 Reply 
 
Nigel Armstrong
Engineering, - Specialist services
United Kingdom, Joined Oct 2000, 1096

Nigel Armstrong

Engineering, - Specialist services
United Kingdom,
Joined Oct 2000
1096
17:05 Feb-17-2014
Re: Obituary - Michael D.C. Moles 1948-2014
In Reply to Manuel Haces at 16:20 Feb-17-2014 .

Its very sad and a great loss for Michael's family, friends, colleagues, the NDT and the wider engineering communities he served so diligently. However his good name and his body of work which contributed enormously to the technical advances made in NDT will endure and continue to inform and inspire many people now and in the future.

Michael Moles I salute you and mourn your passing.g

Nigel Armstrong

 
 Reply 
 
Jim Yukes
Consultant
Canada, Joined Aug 2005, 11

Jim Yukes

Consultant
Canada,
Joined Aug 2005
11
18:50 Feb-17-2014
Re: Obituary - Michael D.C. Moles 1948-2014
In Reply to Ed Ginzel at 12:05 Feb-17-2014 (Opening).

Thank you for posting Michael's obituary. I passed it on to the IPEIA committee in Alberta where Michael has made presentations in the past. He will certainly be missed there.

Jim Yukes

 
 Reply 
 
P V SASTRY
R & D, NDT tecniques metallurgy
TAKEN VRS FROM THE POSITION OF SR. DEPUTY GENERAL MANAGER BHEL CORPORATE R&D, India, Joined Jan 2003, 195

P V SASTRY

R & D, NDT tecniques metallurgy
TAKEN VRS FROM THE POSITION OF SR. DEPUTY GENERAL MANAGER BHEL CORPORATE R&D,
India,
Joined Jan 2003
195
17:39 Feb-18-2014
Re: Obituary - Michael D.C. Moles 1948-2014
In Reply to Ed Ginzel at 12:05 Feb-17-2014 (Opening).

Thanks for posting this obituary.

I do not know Mr. Michael personally but I keep seeing his mails in the NDT forum.

It is indeed a sad loss not only to his family and friends but particularly to the NDT community.

I had a chance to see the R/D Tech Phased Array equipment and technology some time around the year 2000 and I was impressed by the advancements they have made at that time and I am sure that Mr. Michael had an important contribution in it.

I pray that his soul shall rest in piece and wish fortitude to his family and friends to bear with the loss.

P V SASTRY

 
 Reply 
 
Phil Herman
Sales, - Manufacture of NDT Reference Standards/Test Blocks
PH Tool Reference Standards, USA, Joined Oct 1999, 79

Phil Herman

Sales, - Manufacture of NDT Reference Standards/Test Blocks
PH Tool Reference Standards,
USA,
Joined Oct 1999
79
00:42 Feb-19-2014
Re: Obituary - Michael D.C. Moles 1948-2014
In Reply to Ed Ginzel at 12:05 Feb-17-2014 (Opening).

I was saddened to hear the news of our friend Michael's passing. I always enjoyed Michael's zest for life and his unselfish willingness to share his expertise with others. He was a gentle man who will be missed. Sincere condolences to his family.

 
 Reply 
 
Jackie Berry
Jackie Berry
11:50 Feb-25-2014
Re: Obituary - Michael D.C. Moles 1948-2014
In Reply to Ed Ginzel at 12:05 Feb-17-2014 (Opening).

I was so sad to hear the news. I have known Michael for many years and always found him a true gentleman. I last met up with him in Brazil in June last year.

He will leave a huge hold to fill in the NDT world.

Please send my condolences to his family and friends

Jackie Berry
Silverwing UK Ltd (and ex Technology Design)

 
 Reply 
 
S R G PRABHU
Consultant, AUT specialist
FREELANCE, India, Joined Aug 2008, 64

S R G PRABHU

Consultant, AUT specialist
FREELANCE,
India,
Joined Aug 2008
64
11:43 Mar-04-2014
Re: Obituary - Michael D.C. Moles 1948-2014
In Reply to Ed Ginzel at 12:05 Feb-17-2014 (Opening).

I am shocked to hear the news about the sudden passing away of Mr.Moles.I have not had a chance to meet him but have read his postings and its a great loss not only for his family and friends and students,colleagues, but for us, the numerous NDT.net members who have been benefited by his knowledge.
Like Nigel said,I can only salute him.....thank you very much Dr.Michael Moles....

 
 Reply 
 
Bob Scholes
Bob Scholes
01:14 Mar-05-2014
Re: Obituary - Michael D.C. Moles 1948-2014
In Reply to Ed Ginzel at 12:05 Feb-17-2014 (Opening).

Very sad news.

Michael was one of the pillars of the NDT community who will be sadly missed.

I had the privilege of working along side Michael in my days with RD Tech and later Olympus NDT. He was a champion, worthy of the highest praise. I remember our days in Berlin and I will toast you in our usual way. Cheers Michael, and God Bless.

 
 Reply 
 
Csaba Hollo
,
Retired, Canada, Joined Feb 2010, 301

Csaba Hollo

,
Retired,
Canada,
Joined Feb 2010
301
19:49 Mar-05-2014
Re: Obituary - Michael D.C. Moles 1948-2014
In Reply to Ed Ginzel at 12:05 Feb-17-2014 (Opening).

Thanks, Ed.

You summed up the man quite eloquently. The few times I have had a chance to cross paths with Michael were cherished indeed.

He will be missed.

RIP

 
 Reply 
 

Product Spotlight

Customized Probes and Transducers

With a strong development department and our own piezocomposite production, we accompany you from th
...
e first product idea to serial production. Our scientists are continuously researching new methods in the field of ultrasonic measurement technology. The progress achieved enables us to offer you optimal solutions.
>

Micro CT

nanoVoxel series has nano-scale resolution by using high voltage X-ray source (from 80-300 kV) wit
...
h micro focal spot and highly sensitive detector including different kinds of big size panel detectors and lens coupling CCD.
>

GEKKO - Portable Phased Array Testing with TFM in Real-Time

The portable phased array testing system GEKKO provides 64 parallel test channels. On creating testi
...
ng parameters the operator is assisted by the CIVA software. Due to its modular set-up the GEKKO instrument is suitable for operators of all skill levels.
>

CIVA 2020 UT Module

CIVA NDE Simulation Software is the world leader of NDT Simulation. The UT simulation Module incl
...
udes: - "Beam computation": Beam propagation simulation - "Inspection Simulation": Beam interaction with flaws or specimens The user can simulate a whole inspection process (pulse echo, tandem or TOFD) with a wide range of probes (conventional, Phased- arrays or EMAT), components, and flaws.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window