where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Volume Graphics GmbH
By choosing Volume Graphics software, you can rely on more than 20 years of experience in the development of software for non-destructive testi ...
5706 views
Technical Discussions
Bong Jin Son
Engineering, Inspection, Corrosion, Material
SK Innovation, South Korea, Joined Apr 2008, 8

Bong Jin Son

Engineering, Inspection, Corrosion, Material
SK Innovation,
South Korea,
Joined Apr 2008
8
02:28 Nov-23-2007
Carburization thickness measuring

Carburization of low alloy steel tube for fired heater in refinery and petrochemical plant occurs. Sometimes carburzation makes big trouble due to metal dusting and it brings to emergency plant down. I am lookging for the method to measure the thickness of carburization of low alloy steel.
Is there anybody who knows that?


 
 Reply 
 
Ovidiu Iuga
NDT Inspector, thermography
ISCIR, Romania, Joined Dec 2005, 16

Ovidiu Iuga

NDT Inspector, thermography
ISCIR,
Romania,
Joined Dec 2005
16
08:22 Nov-23-2007
Re: Carburization thickness measuring
----------- Start Original Message -----------
: Carburization of low alloy steel tube for fired heater in refinery and petrochemical plant occurs. Sometimes carburzation makes big trouble due to metal dusting and it brings to emergency plant down. I am lookging for the method to measure the thickness of carburization of low alloy steel.
: Is there anybody who knows that?
------------ End Original Message ------------

Are you looking for a NDT method?

It's not possible to determine the depht of carburized layer using a NDT Techinque. Only by micro HV hardness test done on a sample prevlevated from the pipe, tube or whatever it is. As far as I remeber it's a standardised method. If it helps you I can dig and send you the spec. number.

Regards,
Ovidiu



 
 Reply 
 
Ingo Becker
Engineering, NDT Inspector & Sales
ec-works GmbH, Germany, Joined Apr 2000, 30

Ingo Becker

Engineering, NDT Inspector & Sales
ec-works GmbH,
Germany,
Joined Apr 2000
30
01:24 Nov-25-2007
Re: Carburization thickness measuring
We have developed an eddy current application to evaluate the carburisation thickness of steanless steel reformer tubes. As always with eddy current, you need tailored calibration tubes. We have not tried this for low alloy steels, but if the electric and magnetic values of the tubes changes with the carburisation, it might be possible to detect this with eddy current applications.

Best regards

Ingo Becker

----------- Start Original Message -----------
: Carburization of low alloy steel tube for fired heater in refinery and petrochemical plant occurs. Sometimes carburzation makes big trouble due to metal dusting and it brings to emergency plant down. I am lookging for the method to measure the thickness of carburization of low alloy steel.
: Is there anybody who knows that?
------------ End Original Message ------------




 
 Reply 
 
Floyd Atkinson
Floyd Atkinson
05:33 Dec-16-2007
Re: Carburization thickness measuring
Key component, tailored calibration tube sample, conplete with side cut slots, key holes and representative of the density of the tubes being tested. This is very hard to get and then come out with eddy current recordable results. Those tubes must be hydro cleaned and lightly brushed to remove residual chemical trash from the tubes proir to testsing. Been there done that. Then you need a thoroughly experienced eddy current engineer or a legal ASNT Eddy Current Level III to intepret the results.

Good luck.
Floyd Atkinson

----------- Start Original Message -----------
: We have developed an eddy current application to evaluate the carburisation thickness of steanless steel reformer tubes. As always with eddy current, you need tailored calibration tubes. We have not tried this for low alloy steels, but if the electric and magnetic values of the tubes changes with the carburisation, it might be possible to detect this with eddy current applications.
: Best regards
: Ingo Becker
: : Carburization of low alloy steel tube for fired heater in refinery and petrochemical plant occurs. Sometimes carburzation makes big trouble due to metal dusting and it brings to emergency plant down. I am lookging for the method to measure the thickness of carburization of low alloy steel.
: : Is there anybody who knows that?
------------ End Original Message ------------




 
 Reply 
 
Jeff Elam
Jeff Elam
00:01 Oct-13-2011
Re: Carburization thickness measuring
In Reply to Floyd Atkinson at 05:33 Dec-16-2007 .

I have heard of non-destructive methods to test furnace tubes for carburization in-situ. The methods have only been tested on tubes with a maximum chrome percentage of 9. Has anyone heard of a non-destructive test that could be used in-situ to test for carburization on 25 chrome 35 nickel furnace tubes?

 
 Reply 
 
Syed Adnan
Engineering,
SABIC, Saudi Arabia, Joined Dec 2013, 2

Syed Adnan

Engineering,
SABIC,
Saudi Arabia,
Joined Dec 2013
2
09:45 Feb-18-2014
Re: Carburization thickness measuring
In Reply to Jeff Elam at 00:01 Oct-13-2011 .

KABOTA manufactured carburization meter . We are using succesfully.

 
 Reply 
 
Michel Couture
NDT Inspector,
consultant, Canada, Joined Sep 2006, 868

Michel Couture

NDT Inspector,
consultant,
Canada,
Joined Sep 2006
868
23:14 Feb-18-2014
Re: Carburization thickness measuring
In Reply to Jeff Elam at 00:01 Oct-13-2011 .

Have you tried Eddy Current?

 
 Reply 
 
Syed Adnan
Engineering,
SABIC, Saudi Arabia, Joined Dec 2013, 2

Syed Adnan

Engineering,
SABIC,
Saudi Arabia,
Joined Dec 2013
2
06:53 Feb-19-2014
Re: Carburization thickness measuring
In Reply to Michel Couture at 23:14 Feb-18-2014 .

we want to try , d oyou know any global service provider ?

 
 Reply 
 
Mal Hill
United Kingdom, Joined Jun 2012, 14

Mal Hill

United Kingdom,
Joined Jun 2012
14
13:52 Feb-20-2014
Re: Carburization thickness measuring
In Reply to Syed Adnan at 06:53 Feb-19-2014 .

I heard of a team in the Canary islands using TOFD on piping ,measuring the carborisation layer increase along side readings from a normal UT thickness meter-I think theres an articla on the web about it still.

 
 Reply 
 
Kevin Stevens
Kevin Stevens
23:16 Feb-20-2014
Re: Carburization thickness measuring
In Reply to Mal Hill at 13:52 Feb-20-2014 .

My understanding of the Kubota carburisation meter, is that it is a hand held device, so it is typically used on the bottom 2m of reformer tubes. Quest Integrity have an eddy current system mounted on a crawler that can reach the hotter regions of furnaces where the carburisation is worse. Quest have been inspecting HPM alloy (25%Cr-35%Ni) tubes used in ethylene crackers, using an eddy current method. The magnetic permeability increases when the Cr levels in the matrix is depleted below approx. 12 to 15%. A swept frequency approach can be used to infer the carburisation thickness by fitting FEA models to the probe impedance, see Stevens et al, J. Phys D, Appl Phys Vol 37, p501-509, 2004. The quest system is available as a commercial service. The crawler can also measure the tube diameter increase associated with carburisation.

 
 Reply 
 

Product Spotlight

Robotic laser shearography enables 100% inspection of complex, flight-critical composite structures

An article in “Composites World Magazine” showcases Non Destructive Testing of aero-structures
...
with Laser Shearography. Over the years Dantec Dynamics has supplied many solutions for the aerospace industry. Referring to specific customer projects several of these cases are examined to outline the advantages of using Laser Shearography for automated defect detection.
>

OmniScan™ X3 flaw detector

The OmniScan X3 flaw detector is a complete phased array toolbox. Powerful tools, like total focus
...
ing method (TFM) images and advanced visualization capabilities, enable you to complete your inspection with greater confidence.
>

IRIS 9000Plus - Introducing the next generation of heat exchanger inspection.

Representing the seventh generation of the IRIS system, the IRIS 9000 Plus has nearly 200 years of c
...
ombined field inspection experience incorporated in its design. This experience combined with a strong commitment to quality and a history of innovation has made Iris Inspection Services® the undisputed leader in IRIS technology.
>

Sci Aps Z-Series Portable Handheld Analysers

The world’s only handheld analyzer that measures carbon content in stainless (yes even L-grades),s
...
teels, and cast irons. Also accepted for low Si analysis for sulfidic corrosion analysis, and is widely used in the power industry for Cr analysis, for flow accelerated corrosion applications.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window