where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Sonotron NDT
Original developer and manufacturer of advanced ultrasonic instruments
1084 views
Technical Discussions
Dr. Yossi SHOEF
NDT Inspector
Gabi Shoef Ltd, Israel, Joined Dec 2005, 19

Dr. Yossi SHOEF

NDT Inspector
Gabi Shoef Ltd,
Israel,
Joined Dec 2005
19
17:20 Apr-14-2014
Acceptance levels for UT

Could anyone explain what is the X Value in the acceptance graphs of EN 1712 OR EN 11666. What is the meaning of 1.5 thickness for example?

 
 Reply 
 
Mario Talarico
NDT Inspector,
Italy, Joined May 2010, 416

Mario Talarico

NDT Inspector,
Italy,
Joined May 2010
416
21:41 Apr-14-2014
Re: Acceptance levels for UT
In Reply to Dr. Yossi SHOEF at 17:20 Apr-14-2014 (Opening).


Yossi,
in EN 1712: is the length dimension of indication , measured along the longitudinal axis of the weld; so also represents the longitudinal axis of the weld in geometric configuration figures ('Reference System' x, y, z).
In EN 11666 indicates the longitudinal axis of the welding.

In the acceptance tables the length scale is represented in units thickness (t): so if the thickness is 30 mm then 1,5 t is 45 mm; 0.5 t is 15 mm.
In En 1714 and EN-ISO 17640 the definition of t is “thickness of base material (thinner element)”, while in EN 1712 and EN ISO 11666 't' is generic. It is not clear how the definition of En 1714(17640) is compatible with the EN 1712(11666).
To complete, in EN 1714, X is the distance between '0 ' point and the beginning of the indication in the longitudinal axis X (so also represents the axis). The same for EN-ISO 17640.
Normally a 'X' field is created in the report to enter the distance from indication to '0 'point and a field dx for the indication length (the same for the other two axes: ±Y, with dy if necessary; Z, with dz if necessary) as in EN 1714-17640, and all usually understand.
Greetings
Mario

 
 Reply 
 

Product Spotlight

Ultrasonic Testing Immersion Tanks with Unmatched Scanning Features

TecScan’s non-destructive testing Ultrasonic Immersion Tanks & scanners are designed for high pe
...
rformance and demanding NDT testing applications. Our Scan3D™ line of High Precision Immersion Tanks are specifically designed for automated ultrasonic testing of complex composites parts used in aerospace and industrial applications.
>

NOVO Armor 15 & NOVO Armor 22

The Armor Kit Contains the NOVO Armor, which provides additional mechanical protection to the NOVO 1
...
5WN & NOVO 22WN Detectors, the Armor Stand and a traveling soft cover. - Newest shock absorbent technology case - Water resistant design - Supports wired & wireless communication - Multiple positioning options - Tripod connection using the Built-in 1/4” threads - Simple Detector battery replacement
>

IntraPhase Athena Phased Array System

The Athena Phased Array system, manufactured by WesDyne NDE Products & Technology, consists of a pha
...
sed array acquisition system and PC running IntraSpect software. A PC is used to perform acquisition, analysis and storage of the data. System hardware is capable of operating up to four data sets with any combination of phased array or conventional UT probes. NOW AVAILABLE IN 64-64 CONFIGURATION.
>

Sci Aps Z-Series Portable Handheld Analysers

The world’s only handheld analyzer that measures carbon content in stainless (yes even L-grades),s
...
teels, and cast irons. Also accepted for low Si analysis for sulfidic corrosion analysis, and is widely used in the power industry for Cr analysis, for flow accelerated corrosion applications.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window