where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
447 views
Technical Discussions
PvB
PvB
01:30 Apr-08-2003
wet coating thickness measurement

Hello,

Can anyone give more info on the state of the art for remote measurement of the thickness of wet coating (non transparent)?

e.g. laser ultrasonics,
research projects

Greetings,
PvB
Zevenaar Elektronica & Sensoren BV.



 
 Reply 
 
Joerg Schulze-Clewing
Joerg Schulze-Clewing
01:33 Apr-08-2003
Re: wet coating thickness measurement
Hello P.,

The auto industry has a similar task, I just don't know
how these systems would perform in your case.

Check this out:

http://www.optisense.com/pdf_Files/JOT_AST_6_2000.pdf

That system takes into account the temperature rise upon
exitation over a very small surface area. The company
is not too far away from yours, in Bochum, Germany.

Groetjes,

Joerg Schulze-Clewing.

: Hello,
.
: Can anyone give more info on the state of the art for remote measurement of the thickness of wet coating (non transparent)?
.
: e.g. laser ultrasonics,
: research projects
.
: Greetings,
: PvB
: Zevenaar Elektronica & Sensoren BV.
.



 
 Reply 
 
Rajeev Chaudhari
Director,
CALTECH ENGINEERING SERVICES, India, Joined Mar 2003, 13

Rajeev Chaudhari

Director,
CALTECH ENGINEERING SERVICES,
India,
Joined Mar 2003
13
07:15 Apr-09-2003
wet coating thickness measurement
Dear PvB,
Caltech Engineering Services provide remote measurement of thickness of wet coating (non transparent. This istrument has number of uses including automobile industry. For further details contact me at my email address caltech@vsnl.net


: Hello,
.
: Can anyone give more info on the state of the art for remote measurement of the thickness of wet coating (non transparent)?
.
: e.g. laser ultrasonics,
: research projects
.
: Greetings,
: PvB
: Zevenaar Elektronica & Sensoren BV.
.



 
 Reply 
 

Product Spotlight

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

Sci Aps Z-Series Portable Handheld Analysers

The world’s only handheld analyzer that measures carbon content in stainless (yes even L-grades),s
...
teels, and cast irons. Also accepted for low Si analysis for sulfidic corrosion analysis, and is widely used in the power industry for Cr analysis, for flow accelerated corrosion applications.
>

NDTkit RT

NDTkit RT, TESTIA's Digital Radiography software The NDTkit product line software for X-ray analysi
...
s. NDTkit RT is a software benefiting from the Ultis kernel which is dedicated to radiographic image analysis. It offers a set of tools and filtering processes to assist RT operators in finding relevant flaws.
>

EKOSCAN Phased Array

In order to always fit your needs, EKOSCAN can manufacture any type of UT transducer, either convent
...
ional or Phased Array. As an ISO 9001: 2015 certified company, EKOSCAN is extremely careful as far a material selection and manufacturing processes are concerned. Our probes guarantee our customers the benefits of latest innovations regarding piezo-composite, backing, impedance adaptation layer, etc. Specific probes for hostile environment: high temperature, high pressure, corrosive environment,etc. Specific probes designed to fit your specific application: optimization of every parameter to guarantee you the best detection.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window