where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

858 views
Technical Discussions
mike macke
NDT Inspector
GE Inspection Services, USA, Joined Aug 2001, 8

mike macke

NDT Inspector
GE Inspection Services,
USA,
Joined Aug 2001
8
02:06 May-05-2003
Measuring Stainless overlay 309L, 347L, 317L,316 etc.

Hello from South Carolina!!! well, once a year I go out to you all for you opinons on the above subject. Is there a system out there that can measure the thickness of Austentic overlay(ferrite)0.8 to 7.8 and it will vary. The welding application can vary also, but it is mostly automated. The backing is SA 285C or 516-70 mild steel (pressure vessels)or SA210 boiler tubes.For UT, the Z's factor is only 2. For magnetic induction or eddy current, the ferrite is the problem. We still measure befor overlay and after. The thickness will range from 1mm to 12mm.

Thankyou
M.C. Macke.


 
 Reply 
 
Doug Breeze
Director, Consultant; R&D
Inspection Software Limited, United Kingdom, Joined May 2000, 20

Doug Breeze

Director, Consultant; R&D
Inspection Software Limited,
United Kingdom,
Joined May 2000
20
08:44 Jun-05-2003
Re: Measuring Stainless overlay 309L, 347L, 317L,316 etc.
In response to Mike Macke's question a few weeks ago Dinsley Devices and Inspection Software have recently installed an automated system to measure Inconel cladding in the bore of 125mm - 300mm carbon steel pipe. Cladding thickness 0mm - 10mm, +/- 0.1mm. Should be suitable for other similar materials.



 
 Reply 
 

Product Spotlight

NDTkit RT

NDTkit RT, TESTIA's Digital Radiography software The NDTkit product line software for X-ray analysi
...
s. NDTkit RT is a software benefiting from the Ultis kernel which is dedicated to radiographic image analysis. It offers a set of tools and filtering processes to assist RT operators in finding relevant flaws.
>

VeeScan AirCraft Wheel Inspection

The VEESCAN offers maximum flexibility, has a proven mechanical design and records of breakdown-fr
...
ee operation of over 365 days. Appealing to companies in the Aerospace industry, the VEESCAN is ideal for all wheel-testing environments. With a wide selection of probes, the VeeScan allows your wheel testing facility the flexibility to select the most compatible configurations with their workload.
>

NDT.net launches mobile-friendly design

NDT.net has revamped its website providing a mobile-friendly design.The front page received a comp
...
letely new design and all other sections are now reacting responsively on mobile devices. This has been a major step to make our website more user- friendly.
>

IntraPhase Athena Phased Array System

The Athena Phased Array system, manufactured by WesDyne NDE Products & Technology, consists of a pha
...
sed array acquisition system and PC running IntraSpect software. A PC is used to perform acquisition, analysis and storage of the data. System hardware is capable of operating up to four data sets with any combination of phased array or conventional UT probes. NOW AVAILABLE IN 64-64 CONFIGURATION.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window