where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

772 views
Technical Discussions
André Ribeiro
NDT Inspector,
Self Employed, Brazil, Joined Apr 2008, 18

André Ribeiro

NDT Inspector,
Self Employed,
Brazil,
Joined Apr 2008
18
10:20 Sep-10-2014
Omniscan air intake fan troubleshooting.

The air intake fan for the omniscan mx is supposed to run all the time when it's on, or it has a temperature sensor that switches it on and off?

I need to check this before sending it back to olympus for maintenance.

If anyone could please give an insight on this matter, it would be most helpfull.

Cheers.

 
 Reply 
 
Jason M.
Jason M.
21:56 Sep-10-2014
Re: Omniscan air intake fan troubleshooting.
In Reply to André Ribeiro at 10:20 Sep-10-2014 (Opening).

Hello,

The fan is linked to a temp sensor so it will start at approx. 50C and shut off if it cools below the approximate temperature. If you have more questions feel free to join the OmniScan User Group: https://www.linkedin.com/groups?home=&gid=4877375&trk=groups_item_detail-h-logo&goback=.gmr_4877375

Thank you

 
 Reply 
 

Product Spotlight

Eddy Current inspection : RotoETscan Rotating Head

The rotating head RotoETscan detects the presence of longitudinal surface or sub surface defects a
...
t high speed. The rotating head is often installed directly on the production line. It is generally dedicated to the control of long products such as tubes, bars and wires, made of ferrous or non-ferrous material. It can also be used for inspection of small parts (billets).
>

Research Center IDEKO develops an ultrasonic train wheel inspection system for CAF

The Basque Research centre IK4-IDEKO has developed a state-of-the-art ultrasonic inspection system f
...
or the train wheel. This system secures a sound condition of train wheels and is thus a significant contribution to rail transport safety. The device was delivered to CAF recently and its use allows the manufacturer to become an approved supplier of rolling stock in Italy, as it meets the demanding homologation standards of this country. \\\\r\\\\n
>

On Demand Webinar: Using Eddy Current Array for Large Areas in Place of Magnetic Particle and Liquid Penetrant Testing

New on-demand webinar on the use of eddy current array (ECA) technology in lieu of liquid penetrant
...
testing (PT) and magnetic particle testing (MT) for large area screenings. The webinar includes an introduction to the technologies with advantages and disadvantages of each. Side by side examples are discussed including aircraft stringers, engine blades, forgings, weld plates & more. View it today.
>

AIS229 - Multipurpose Real Time System

Latest standard & automatic real time system developed by Balteau. The AIS229 has been designed to
...
do series inspection in a wide variety of industry. Composed of a shielded cabinet, 5 axis manipulator, x-ray generator and tubehead from 160kV to 225kV, a fl at panel & much more, the AIS229 is most certainly one of the most multipurpose RTR system available on the market.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window