where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Phoenix Inspection Systems Limited
Design and manufacture ultrasonic Transducers, Scanners and Custom Solutions for NDT inspections. Innovators in NDT technology
805 views
Technical Discussions
mike macke
NDT Inspector
GE Inspection Services, USA, Joined Aug 2001, 8

mike macke

NDT Inspector
GE Inspection Services,
USA,
Joined Aug 2001
8
02:06 May-05-2003
Measuring Stainless overlay 309L, 347L, 317L,316 etc.

Hello from South Carolina!!! well, once a year I go out to you all for you opinons on the above subject. Is there a system out there that can measure the thickness of Austentic overlay(ferrite)0.8 to 7.8 and it will vary. The welding application can vary also, but it is mostly automated. The backing is SA 285C or 516-70 mild steel (pressure vessels)or SA210 boiler tubes.For UT, the Z's factor is only 2. For magnetic induction or eddy current, the ferrite is the problem. We still measure befor overlay and after. The thickness will range from 1mm to 12mm.

Thankyou
M.C. Macke.


 
 Reply 
 
Doug Breeze
Director, Consultant; R&D
Inspection Software Limited, United Kingdom, Joined May 2000, 20

Doug Breeze

Director, Consultant; R&D
Inspection Software Limited,
United Kingdom,
Joined May 2000
20
08:44 Jun-05-2003
Re: Measuring Stainless overlay 309L, 347L, 317L,316 etc.
In response to Mike Macke's question a few weeks ago Dinsley Devices and Inspection Software have recently installed an automated system to measure Inconel cladding in the bore of 125mm - 300mm carbon steel pipe. Cladding thickness 0mm - 10mm, +/- 0.1mm. Should be suitable for other similar materials.



 
 Reply 
 

Product Spotlight

NEW - TD Focus-ScanRX

The NEW Next Generation Advanced UT platform, TD Focus ScanRX - Also available as a card stack solut
...
ion. Key Improvements 1. Data acquisition is significantly faster than current design 2. Better aesthetic – closely aligns with HandyScan RX 3. Improved IP rating (Target IP66) 4. Ruggedized housing 5. Connectors are protected from impact and ingress 6. Integrated stand and separate retractable handle easy to keep clean) 7. Touchscreen with ruggedized display glass 8. 3-Axis encoder input
>

Magnetic X-Ray Pipeline Crawler 6''-60''

Suitable to work in 6''-60''diameter with speed of up to 18m/min, Max. moving diatance 5 kilometer
...
s and provide the efficient inspection of the pipeline.
>

PROlineTOP Plug & Play Ultrasonic inspection device

As Plug & Play solution it units all control and operation elements in a small housing and therefo
...
re replaces the typical control cabinet...
>

GEKKO - Portable Phased Array Testing with TFM in Real-Time

The portable phased array testing system GEKKO provides 64 parallel test channels. On creating testi
...
ng parameters the operator is assisted by the CIVA software. Due to its modular set-up the GEKKO instrument is suitable for operators of all skill levels.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window