where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
928 views
Technical Discussions
JAGAN
Engineering,
Saudi Arabia, Joined Dec 2011, 23

JAGAN

Engineering,
Saudi Arabia,
Joined Dec 2011
23
05:57 Nov-12-2014
On which materials we can perform UT

Gents,

For UT, how can we decide that we can perform ut or not
i mean based on which criteria or standard....???

and What about UT on miter joints....applicability/best results
any specific requirements for miter joints...????

 
 Reply 
 
MIKE
MIKE
13:37 Nov-12-2014
Re: On which materials we can perform UT
In Reply to JAGAN at 05:57 Nov-12-2014 (Opening).

You can do Ultrasound on pretty much any material.

 
 Reply 
 
JAGAN
Engineering,
Saudi Arabia, Joined Dec 2011, 23

JAGAN

Engineering,
Saudi Arabia,
Joined Dec 2011
23
14:59 Nov-12-2014
Re: On which materials we can perform UT
Mr.Mike,

That is not professional answer.
what about titanium, low density ,low acoustic impedance materials and some other alloy materials..???

Thanks
 
 Reply 
 
THEO MICOTTIS
Italy, Joined May 2013, 82

THEO MICOTTIS

Italy,
Joined May 2013
82
19:39 Nov-12-2014
Re: On which materials we can perform UT
In Reply to JAGAN at 14:59 Nov-12-2014 .

Dear Jagan, there are a lot of information on this subject in internet
Regards Theo

 
 Reply 
 

Product Spotlight

TESTD-PT SYSTEM

Pulse thermography is a non-contact test method that is ideal for the characterization of thin fil
...
ms and coatings or the detection of defects. With a remarquable short test time and a high detection sensitivity, the Telops TESTD-PT is the perfect tool for non- destructive testing. With such high frame rates, it is even possible to investigate highly conductive or diffusive materials.
>

Research Center IDEKO develops an ultrasonic train wheel inspection system for CAF

The Basque Research centre IK4-IDEKO has developed a state-of-the-art ultrasonic inspection system f
...
or the train wheel. This system secures a sound condition of train wheels and is thus a significant contribution to rail transport safety. The device was delivered to CAF recently and its use allows the manufacturer to become an approved supplier of rolling stock in Italy, as it meets the demanding homologation standards of this country. \\\\r\\\\n
>

On-Demand Webinar: Advanced Ultrasonic Techniques for HTHA Detection & Assessment

In the Oil and Gas industry, High Temperature Hydrogen Attack (HTHA) can occur in steels operating a
...
t high temperature, usually above 205°C (400°F). Early stages of HTHA are very difficult to detect. Join us for a webinar presented by Guy Maes, Zetec Sales Engineer Director. The webinar will demonstrate how advanced ultrasonic techniques are deployed for efficient and reliable HTHA inspections.
>

Cygnus 6+ PRO Multi-Mode Ultrasonic Thickness Gauge

The Cygnus 6+ PRO thickness gauge is the most advance gauge within the Cygnus range with key featu
...
res including: comprehensive data logging; A-scan and B-scan display; manual gain control; Bluetooth connectivity; and much more. With its unique dual display and three measuring modes (Multiple-Echo, Echo-Echo and Single-Echo), this surface thickness gauge offers maximum versatility for inspections.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window