where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
586 views
Technical Discussions
Nirav Dave
NDT Inspector,
Company, India, Joined Jul 2014, 11

Nirav Dave

NDT Inspector,
Company,
India,
Joined Jul 2014
11
11:09 Nov-22-2014
ECT Using Notches

Recently i have come across an inquiry for Stainless steel tubes (Size:- 13.70mm OD X 2.24mm wall thickness)

Weather ECT is feasible using encircling coil and reference sensitivity is ID & OD Longitudinal and transverse 45 deg. V- Type notch?

Rgs
Nirav

 
 Reply 
 
langtuteng
Armenia, Joined Nov 2014, 196

langtuteng

Armenia,
Joined Nov 2014
196
14:08 Nov-22-2014
Re: ECT Using Notches
In Reply to Nirav Dave at 11:09 Nov-22-2014 (Opening).

hi , i think it is feasible. and you should use the absolute and difference probe. of course, if your client have given you the criterion, you should carry it out according to the criterion. good luck.

 
 Reply 
 

Product Spotlight

YXLON Cougar EVO

Scalable small footprint X-ray inspection systems for assembly and laboratory applications. The
...
YXLON Cougar EVO series was designed to provide the "best-in- class" inspection solutions for SMT, semiconductor, and laboratory assembly applications, while maintaining a small system footprint for maximum convenience. With optimized software and hardware, these systems produce higher quality and more consistent results than other electronics inspection systems currently on the market.
>

NEOS III

NEOS III is Logos Imagings lightest DR system. With a built-in battery and internal wireless commu
...
nication, the NEOS III is perfect for users that want to quickly assess an item.
>

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

GEKKO - Portable Phased Array Testing with TFM in Real-Time

The portable phased array testing system GEKKO provides 64 parallel test channels. On creating testi
...
ng parameters the operator is assisted by the CIVA software. Due to its modular set-up the GEKKO instrument is suitable for operators of all skill levels.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window