where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

PBP Optel sp. z o.o.
Weare searching new ways - in ultrasonic techniques- in creation of new productsUltrasonic instruments - Ultrasonic Testing Card
1194 views
Technical Discussions
jagan
Engineering,
Saudi Arabia, Joined Dec 2011, 23

jagan

Engineering,
Saudi Arabia,
Joined Dec 2011
23
09:02 Jan-08-2015
Acceptance criteria for surface ECT

Hi
Is there any criteria for surface ECT for acceptance and rejection.

Surface ECT with absolute probe technique on Inconnel625 meterial.

    
 
 Reply 
 
Mario Talarico
NDT Inspector,
Italy, Joined May 2010, 411

Mario Talarico

NDT Inspector,
Italy,
Joined May 2010
411
10:10 Jan-08-2015
Re: Acceptance criteria for surface ECT
In Reply to jagan at 09:02 Jan-08-2015 (Opening).

yes.
greetings
mario

    
 
 Reply 
 
jagan
Engineering,
Saudi Arabia, Joined Dec 2011, 23

jagan

Engineering,
Saudi Arabia,
Joined Dec 2011
23
11:02 Jan-08-2015
Re: Acceptance criteria for surface ECT
In Reply to Mario Talarico at 10:10 Jan-08-2015 .

Mr. Mario,

let me know the standard for this.

    
 
 Reply 
 
Mario Talarico
NDT Inspector,
Italy, Joined May 2010, 411

Mario Talarico

NDT Inspector,
Italy,
Joined May 2010
411
00:33 Jan-09-2015
Re: Acceptance criteria for surface ECT
In Reply to jagan at 11:02 Jan-08-2015 .

Jagan,
no.
Eddy current notche standard for flat surface (including surface round), bolt hole, but also pipes, are established for the production or in the service. For example AF specification, ASTM E 426, when matched with product specification, especially those of the main manufacturers of aircraft and avio turbine, where inconel,nickel alloys and titanium, are widely used. RR, MTU, Snecma, P & W, etc., have elaborated in detail their specifications to detect crack-like surface signals. Of course the scope is well defined.
Do not understand what you're handling. I suggest you retrieve and comply with the specifications of the product manufacturer to prevent improper application. Remains in your 'scope'.
greetings
mario

    
 
 Reply 
 
Nat
Nat
08:22 Jan-12-2015
Re: Acceptance criteria for surface ECT
In Reply to Mario Talarico at 00:33 Jan-09-2015 .

BS EN 1711 outlines that any indication found to be verified by MPI/ LPT,
Criteria will wary depending on what stage is the product like Mill , finishing(weld), in-service(SCC, fatigue) and applicable industry( Aero, nuclear,O&G)

Generally all liner indications are to be repaired.

Nat

    
 
 Reply 
 
Jagan
Engineering,
Saudi Arabia, Joined Dec 2011, 23

Jagan

Engineering,
Saudi Arabia,
Joined Dec 2011
23
08:31 Jan-12-2015
Re: Acceptance criteria for surface ECT
In Reply to Nat at 08:22 Jan-12-2015 .

NAT,

BS EN 1711 is to perform surface inspection on the welds.

    
 
 Reply 
 

Product Spotlight

FD800 Bench Top Flaw Detectors

The bench-top FD800 flaw detector range combines state-of-the-art flaw detection with advanced mater
...
ial thickness capabilities. Designed for use in the laboratory these gauges are the tool you need for all your flaw detecting needs.
>

Semi-Automated Phased Array Immersion System for Small Composite Parts

Turn-key semi-automated system as an improved and affordable solution for inspection of small comp
...
osite parts. Includes support table, immersion tank, scanner, PA instrument, PC, Analysis software, database, wedge management and other options.
>

UCI Hardness Tester NOVOTEST T-U2

UCI hardness tester NOVOTEST T-U2 is is used for non-destructive hardness testing of: metals and
...
alloys by scales of hardness: Rockwell (HRC), Brinell (HB), Vickers (HV); non-ferrous metals, alloys of iron etc., and using five additional scales for calibration; with tensile strength (Rm) scale determines the tensile strength of carbon steel pearlitic products by automatic recalculation from Brinell (HB) hardness scale.
>

High-end Ultrasonic Flaw Detector with 32:128PR PAUT and 2-ch TOFD: SyncScan 2

SIUI’s newly launched SyncScan 2, is a high-end ultrasonic flaw detector with 32:128PR PAUT and
...
2-ch TOFD, which can maximize your efficiency for PA and TOFD. ● Support PA/TOFD/UT ● 32-ch PA is more suitable for inspection on extra-thick wall and high-attenuation material. ● 32-ch PA and 2-ch TOFD work simultaneously. ● Support PR mode for corrosion inspection.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window