where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

AT-Automation Technology GmbH
AT -Automation Technology is a systems house for industrial image processing. AT offers thermographic ndt systems as well as high-speed 3D sensors.
1133 views
Technical Discussions
Hari
Other,
Qualitas Material Testing Laboratories, India, Joined Nov 2014, 3

Hari

Other,
Qualitas Material Testing Laboratories,
India,
Joined Nov 2014
3
10:36 Mar-02-2015
Regarding Coil MPI procedure

Hello NDT friends....Hope all of them are doing good...
Can somebody send me the Coil MPI procedure to the following mail id hari.ndt5@gmail.com. or please advise me how i can get it..
The inspection areas of Coil mpi are BHA tools, High pressure joints like Pup joints, Chicksan, Elbows, Check valves etc....

 
 Reply 
 
Keith
NDT Inspector, ASNT Level 3
Chimaera Inspection Services, South Africa, Joined Jan 2009, 17

Keith

NDT Inspector, ASNT Level 3
Chimaera Inspection Services,
South Africa,
Joined Jan 2009
17
18:32 Mar-02-2015
Re: Regarding Coil MPI procedure
In Reply to Hari at 10:36 Mar-02-2015 (Opening).

Hi Hari


The good Level II techs here use their original training material, the internet or the services of their employer's Level III when a procedure/work's instruction is to be compiled.

It's best to determine: what sort of stress loads are applied to the components, where they could fracture, what is the orientation of the expected defects, are the defects on or below the surface, permeability of the material, size of encircling coil required, type of current etc. etc. when compiling a procedure.

Greetings from South Africa.

1
 
 Reply 
 
Bruce McPherson
Consultant
MFL Services, United Kingdom, Joined Mar 2009, 26

Bruce McPherson

Consultant
MFL Services,
United Kingdom,
Joined Mar 2009
26
22:24 Mar-09-2015
Re: Regarding Coil MPI procedure
In Reply to Hari at 10:36 Mar-02-2015 (Opening).

I suggest you review the procedure for MPI on BHA components in the following standards:
TH Hill DS-1, API RP7G-2 and Fearnley procter NS-2, and find the one that best suits your particular application, or if necessary, pick the relevant parts from each procedure to create your own.

Regards

Bruce McPherson

1
 
 Reply 
 

Product Spotlight

Ultrasonic Probe Recharacterization Service

NDT Systems offers a comprehensive Aftercare and Recharacterization Service for all our ultrasonic
...
probes. The Recharacterization Service is fully compliant with International ASTM E1065 Standard Guide (and other applicable standards) and offers complete documentation, traceable to the ASTM E1065 Standard. For more details or to schedule Recharacterization Services contact ndtsales@ndtsystems.com
>

NOVO Armor 15 & NOVO Armor 22

The Armor Kit Contains the NOVO Armor, which provides additional mechanical protection to the NOVO 1
...
5WN & NOVO 22WN Detectors, the Armor Stand and a traveling soft cover. - Newest shock absorbent technology case - Water resistant design - Supports wired & wireless communication - Multiple positioning options - Tripod connection using the Built-in 1/4” threads - Simple Detector battery replacement
>

TraiNDE UT

TraiNDE UT is a virtual tool associated with a signal database which simulates real inspection con
...
ditions for numerous applications (Type A/V1 block, DAC block, welds and plates).
>

UCI Hardness Tester NOVOTEST T-U2

UCI hardness tester NOVOTEST T-U2 is is used for non-destructive hardness testing of: metals and
...
alloys by scales of hardness: Rockwell (HRC), Brinell (HB), Vickers (HV); non-ferrous metals, alloys of iron etc., and using five additional scales for calibration; with tensile strength (Rm) scale determines the tensile strength of carbon steel pearlitic products by automatic recalculation from Brinell (HB) hardness scale.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window