where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

NOVO DR
develops and manufactures cutting edge Portable Digital Radiography X-ray Inspection Systems.
1879 views
Technical Discussions
Bruno Candeias
NDT Inspector,
Qualend, Portugal, Joined May 2015, 3

Bruno Candeias

NDT Inspector,
Qualend,
Portugal,
Joined May 2015
3
13:07 May-14-2015
GE Phasor XS

Good morning!


Recently I'm gonna start to work with the UT equipement GE Phasor XS and I have a small problem...I can't change the display view in phased array mode to TOP VIEW. The options in the scrren simply don't appear... I also know that TOP VIEW option is really installed but i can't access this... Can anyone tell me why this is happening?


Best Regards

Bruno Candeias

 
 Reply 
 
Haitham ibrahim
Engineering, technical support
GE, Saudi Arabia, Joined May 2015, 2

Haitham ibrahim

Engineering, technical support
GE,
Saudi Arabia,
Joined May 2015
2
22:10 May-14-2015
Re: GE Phasor XS
In Reply to Bruno Candeias at 13:07 May-14-2015 (Opening).

Hi i am haitham ibrahim from ge inspection technology... The tob view mode is working only wjen you connect The DM probe (corrosion probe) or the rotto array probe


Also please check in the starting screen of the device if it's mentioned top view option or not !!

 
 Reply 
 
Bruno Candeias
NDT Inspector,
Qualend, Portugal, Joined May 2015, 3

Bruno Candeias

NDT Inspector,
Qualend,
Portugal,
Joined May 2015
3
10:05 May-15-2015
Re: GE Phasor XS
In Reply to Haitham ibrahim at 22:10 May-14-2015 .

Hello again,


I've checked the start screen and doesn't appear the top view feature...I've checked also the invoice of the machine and is included in the price, maybe is not activated... I connected the probe and the encoder and stays the same... What should i do more?

Thank you

 
 Reply 
 
Haitham
Engineering, technical support
GE, Saudi Arabia, Joined May 2015, 2

Haitham

Engineering, technical support
GE,
Saudi Arabia,
Joined May 2015
2
10:48 May-15-2015
Re: GE Phasor XS
In Reply to Bruno Candeias at 13:07 May-14-2015 (Opening).

According what you mentioned the top view is not installed .. Now you have to contact the ge directly or the ge channel partne that sold you the device . Don't worry they will provide you with acode that you will you it to upgrade the machine with the top view option also please use that email address to contact ge support services
Phone: +1 866 243-2638

ITTechsupport@ge.com

 
 Reply 
 
Bruno Candeias
NDT Inspector,
Qualend, Portugal, Joined May 2015, 3

Bruno Candeias

NDT Inspector,
Qualend,
Portugal,
Joined May 2015
3
11:06 May-15-2015
Re: GE Phasor XS
In Reply to Haitham at 10:48 May-15-2015 .

My Boss already sent an e-mail to the vendor a week ago...We are waiting.


Thanks for the information!
Best Regards

 
 Reply 
 
roy hutchinson
roy hutchinson
22:46 Nov-02-2019
Re: GE Phasor XS
In Reply to Haitham at 10:48 May-15-2015 .

hi I have the offer of a phasor xs what are the top of the range options for this model ?

 
 Reply 
 

Product Spotlight

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

FAAST-PA! OEM Patented phased Array for high speed UT inspection

Multiangle, Multifocus, Multifrequency, Multibeam. Instead of stacking UT electronics and having m
...
any PA probes, FAAST-PA is able to transmit all delay laws within ONE single shot in Real time.
>

Immersion systems

ScanMaster ultrasonic immersion systems are designed for high throughput, multi shift operation in a
...
n industrial or lab environment. These fully integrated systems provide various scanning configurations and incorporate conventional and phased arrays technologies to support diverse applications, such as inspection of disks, bars, shafts, billets and plates. All of ScanMaster immersion systems are built from high accuracy scanning frames allowing for scanning of complex parts and include a multi-channel ultrasonic instrument with exceptional performance. The systems are approved by all major manufacturers for C-scan inspection of jet engine forged discs. Together with a comprehensive set of software modules these flexible series of systems provide the customer with the best price performance solutions.
>

GUL QSR1® Scanning

How do you measure pipe wall thickness without direct access to the area? QSR® Scanning - Guide Wav
...
e Quantitative Short Range Scanning.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window