where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Eddyfi
Eddyfi Technologies provide the most advanced NDT technologies in the world, helping OEMs, asset owners and service companies enhance productivit ...
2368 views
Technical Discussions
Shankar Arumugam
Other, NDE Engineer
India, Joined Oct 2013, 39

Shankar Arumugam

Other, NDE Engineer
India,
Joined Oct 2013
39
13:57 Oct-19-2015
System of Identification in RT

In ASME Sec-V, Article 2, T-224 : System of identification, it is mentioned "This identification system does not necessarily require that the information appear as radiographic images." What are the other methods to make permanent identifications in a radiograph?

1
 
 Reply 
 
N B rengaraju
NDT Inspector, NDT Level-III/Radiation Safety Officer(RSO)
Marine and Heavy Engineering Company, MALAYSIA., India, Joined Sep 2014, 106

N B rengaraju

NDT Inspector, NDT Level-III/Radiation Safety Officer(RSO)
Marine and Heavy Engineering Company, MALAYSIA.,
India,
Joined Sep 2014
106
16:32 Oct-19-2015
Re: System of Identification in RT
In Reply to Shankar Arumugam at 13:57 Oct-19-2015 (Opening).

Very Simple. Write the Identification with a permanent marker pen on the radiograph.

1
 
 Reply 
 
jon wallis
NDT Inspector, -
Netherlands, Joined Feb 2010, 626

jon wallis

NDT Inspector, -
Netherlands,
Joined Feb 2010
626
17:09 Oct-20-2015
Re: System of Identification in RT
In Reply to N B rengaraju at 16:32 Oct-19-2015 .

Or perforate the film with the ident.

1
 
 Reply 
 
Shankar Arumugam
Other, NDE Engineer
India, Joined Oct 2013, 39

Shankar Arumugam

Other, NDE Engineer
India,
Joined Oct 2013
39
13:09 Oct-22-2015
Re: System of Identification in RT
In Reply to jon wallis at 17:09 Oct-20-2015 .

Is there any equipment to perforate or any stamping accessories available for making identifications in radiograph? kindly refer. Thanks.

2
 
 Reply 
 
jon wallis
NDT Inspector, -
Netherlands, Joined Feb 2010, 626

jon wallis

NDT Inspector, -
Netherlands,
Joined Feb 2010
626
17:51 Oct-22-2015
Re: System of Identification in RT
In Reply to Shankar Arumugam at 13:09 Oct-22-2015 .

Perforating the film is standard practice in aircraft ndt, go to an ndt equipment supplier and they should be able to help you.

2
 
 Reply 
 
Steven Doc
Other, Quality Manager
Siemens Energy, Egypt, Joined Feb 2011, 187

Steven Doc

Other, Quality Manager
Siemens Energy,
Egypt,
Joined Feb 2011
187
10:58 Oct-23-2015
Re: System of Identification in RT
In Reply to Shankar Arumugam at 13:57 Oct-19-2015 (Opening).

Shankar,
You should always keep in mind that ASME prescribe the minimum requirements to meet code endorsement. This however does not always equate to the best auditable method or the best method ensuring integrity. Marking of Radiographs is becoming an increasingly common subject on Construction Sites regarding content and method of Radiograph ID. Regardless of method employed, always ensure you have an auditable cross check method in place to ensure that "ringing" is not creeping into the workload.

Personally, I cannot see beyond lead letters on the work piece detailing date,contractor, line and weld number. The rest of the detail can be verified from the Weld Summary Sheets.

 
 Reply 
 
Oliviero
NDT Inspector,
Quality Control srl, Italy, Joined Oct 2008, 414

Oliviero

NDT Inspector,
Quality Control srl,
Italy,
Joined Oct 2008
414
21:48 Oct-28-2015
Re: System of Identification in RT
In Reply to Shankar Arumugam at 13:09 Oct-22-2015 .

There are also photoprinting systems. The film supplier could suggest you all the suggested identification films system

 
 Reply 
 
P. M. Mahesh
P. M. Mahesh
15:24 Nov-04-2015
Re: System of Identification in RT
In Reply to Shankar Arumugam at 13:57 Oct-19-2015 (Opening).

Hi Shankar,

You could use an id printer, all the relevant information is printed on a sheet of paper and the information is re-produced on the radiograph before its processing.

Thank you
P. M. Mahesh

 
 Reply 
 

Product Spotlight

Research and Applications Development For NDT

The Research and Applications Development (RAD) group is a newly formed team within Acuren dedicat
...
ed to tackling challenging inspection problems. Our focus is the development of novel, field deployable, advanced inspection techniques for use in cases where standard NDT methods are ineffective. We don't wait for new innovations, we engineer them. From concept to commissioning.
>

Compact NDT inspection-heads for measurements with active thermography

The compact inspection head is suitable for thermographic ndt tasks. The uncooled infrared camera
...
is specially developed for NDI-tasks and offers a thermal sensitivity until now known only from thermal imagers with cooled detector. All required components and functions are integrated into the inspection-head. You will only need an ethernet cable to connect the sensor with the evaluation system.
>

UCI Hardness Tester NOVOTEST T-U2

UCI hardness tester NOVOTEST T-U2 is is used for non-destructive hardness testing of: metals and
...
alloys by scales of hardness: Rockwell (HRC), Brinell (HB), Vickers (HV); non-ferrous metals, alloys of iron etc., and using five additional scales for calibration; with tensile strength (Rm) scale determines the tensile strength of carbon steel pearlitic products by automatic recalculation from Brinell (HB) hardness scale.
>

XRHRobotStar

In high volume industries like automotive the requirement for a hundred percent X-ray inspection c
...
reates a bottleneck in the production. The XRHRobotStar is a fully Automated Defect Recognition (ADR) capable robot-system that allows an ultra-fast in-line inspection.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window