where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
2553 views
Technical Discussions
Shankar Arumugam
Other, NDE Engineer
India, Joined Oct 2013, 39

Shankar Arumugam

Other, NDE Engineer
India,
Joined Oct 2013
39
13:57 Oct-19-2015
System of Identification in RT

In ASME Sec-V, Article 2, T-224 : System of identification, it is mentioned "This identification system does not necessarily require that the information appear as radiographic images." What are the other methods to make permanent identifications in a radiograph?

1
 
 Reply 
 
N B rengaraju
NDT Inspector, NDT Level-III/Radiation Safety Officer(RSO)
Marine and Heavy Engineering Company, MALAYSIA., India, Joined Sep 2014, 107

N B rengaraju

NDT Inspector, NDT Level-III/Radiation Safety Officer(RSO)
Marine and Heavy Engineering Company, MALAYSIA.,
India,
Joined Sep 2014
107
16:32 Oct-19-2015
Re: System of Identification in RT
In Reply to Shankar Arumugam at 13:57 Oct-19-2015 (Opening).

Very Simple. Write the Identification with a permanent marker pen on the radiograph.

1
 
 Reply 
 
jon wallis
NDT Inspector, -
Netherlands, Joined Feb 2010, 626

jon wallis

NDT Inspector, -
Netherlands,
Joined Feb 2010
626
17:09 Oct-20-2015
Re: System of Identification in RT
In Reply to N B rengaraju at 16:32 Oct-19-2015 .

Or perforate the film with the ident.

1
 
 Reply 
 
Shankar Arumugam
Other, NDE Engineer
India, Joined Oct 2013, 39

Shankar Arumugam

Other, NDE Engineer
India,
Joined Oct 2013
39
13:09 Oct-22-2015
Re: System of Identification in RT
In Reply to jon wallis at 17:09 Oct-20-2015 .

Is there any equipment to perforate or any stamping accessories available for making identifications in radiograph? kindly refer. Thanks.

2
 
 Reply 
 
jon wallis
NDT Inspector, -
Netherlands, Joined Feb 2010, 626

jon wallis

NDT Inspector, -
Netherlands,
Joined Feb 2010
626
17:51 Oct-22-2015
Re: System of Identification in RT
In Reply to Shankar Arumugam at 13:09 Oct-22-2015 .

Perforating the film is standard practice in aircraft ndt, go to an ndt equipment supplier and they should be able to help you.

2
 
 Reply 
 
Steven Doc
Other, Quality Manager
Siemens Energy, Egypt, Joined Feb 2011, 187

Steven Doc

Other, Quality Manager
Siemens Energy,
Egypt,
Joined Feb 2011
187
10:58 Oct-23-2015
Re: System of Identification in RT
In Reply to Shankar Arumugam at 13:57 Oct-19-2015 (Opening).

Shankar,
You should always keep in mind that ASME prescribe the minimum requirements to meet code endorsement. This however does not always equate to the best auditable method or the best method ensuring integrity. Marking of Radiographs is becoming an increasingly common subject on Construction Sites regarding content and method of Radiograph ID. Regardless of method employed, always ensure you have an auditable cross check method in place to ensure that "ringing" is not creeping into the workload.

Personally, I cannot see beyond lead letters on the work piece detailing date,contractor, line and weld number. The rest of the detail can be verified from the Weld Summary Sheets.

 
 Reply 
 
Oliviero
NDT Inspector,
Quality Control srl, Italy, Joined Oct 2008, 414

Oliviero

NDT Inspector,
Quality Control srl,
Italy,
Joined Oct 2008
414
21:48 Oct-28-2015
Re: System of Identification in RT
In Reply to Shankar Arumugam at 13:09 Oct-22-2015 .

There are also photoprinting systems. The film supplier could suggest you all the suggested identification films system

 
 Reply 
 
P. M. Mahesh
P. M. Mahesh
15:24 Nov-04-2015
Re: System of Identification in RT
In Reply to Shankar Arumugam at 13:57 Oct-19-2015 (Opening).

Hi Shankar,

You could use an id printer, all the relevant information is printed on a sheet of paper and the information is re-produced on the radiograph before its processing.

Thank you
P. M. Mahesh

 
 Reply 
 

Product Spotlight

GUL Subsea Solutions - Screeening & Monitoring

To inspect new and existing subsea lines, you need proven technology and experience. GUL offers it's
...
technology to solve this challenge: GUL Subsea and gMAT Transducer Rings.
>

VeeScan AirCraft Wheel Inspection

The VEESCAN offers maximum flexibility, has a proven mechanical design and records of breakdown-fr
...
ee operation of over 365 days. Appealing to companies in the Aerospace industry, the VEESCAN is ideal for all wheel-testing environments. With a wide selection of probes, the VeeScan allows your wheel testing facility the flexibility to select the most compatible configurations with their workload.
>

A1525 SOLO

A1525 Solo – the most compact and affordable TMF unit with two phased array transducers and 3D v
...
isualization and analysis software in standard delivery set. A compact, ergonomic and easy to handheld Phased Array unit based on Total Focusing Method for easy-going imaging of inspection objects with two-dimensional and three-dimensional visualization and evaluation of inspection results.
>

NDTkit RT

NDTkit RT, TESTIA's Digital Radiography software The NDTkit product line software for X-ray analysi
...
s. NDTkit RT is a software benefiting from the Ultis kernel which is dedicated to radiographic image analysis. It offers a set of tools and filtering processes to assist RT operators in finding relevant flaws.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window