where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

4111 views
Career Discussions
vengadesh
Engineering,
Tech Mahindra LTD, India, Joined Mar 2016, 4

vengadesh

Engineering,
Tech Mahindra LTD,
India,
Joined Mar 2016
4
10:53 Apr-01-2016
How to prepare for level-III exam

Dear sir,
I have a plan to wrote level-III exam on feburary 2017,NDT Basic exam, Ultrasonic testing(Level-III),Magnetic particle testing(Level-III).How to prepare for the exam,what are the study materials required to prepare for the exam.I need your valuable reply sir.

    
 
 
Anmol Birring
Consultant,
Birring NDE Center, Inc., USA, Joined Aug 2011, 692

Anmol Birring

Consultant,
Birring NDE Center, Inc.,
USA,
Joined Aug 2011
692
21:17 Apr-01-2016
Re: How to prepare for level-III exam
In Reply to vengadesh at 10:53 Apr-01-2016 (Opening).

As a minimum you need the Level III study Guides and Materials and Process book from ASNT. I do hope you have experience to answer practical questions.

    
 
 
Carlos Correia
R & D, - -
UCV & EGROUP, Venezuela, Joined Oct 2008, 120

Carlos Correia

R & D, - -
UCV & EGROUP,
Venezuela,
Joined Oct 2008
120
00:54 Apr-04-2016
Re: How to prepare for level-III exam
In Reply to vengadesh at 10:53 Apr-01-2016 (Opening).

I published an entry in my blog:

http://carloscorreiadaluz.blogspot.com/

    
 
 
anjaneya prasad
anjaneya prasad
07:30 Feb-06-2017
Re: How to prepare for level-III exam
In Reply to vengadesh at 10:53 Apr-01-2016 (Opening).

If u have membership in asnt u can purchase materials in the website online. they will deliver to u
Following are the materials latest according to syllabus.

www.asnt.org publications purchase

Basic 2251 mpt 2253 ut 2261 cost each 43.25$ per asnt member other wise 58$

Please check it www.asnt.org certification bottom left study for exams

    
 
 

Product Spotlight

NDT.net launches mobile-friendly design

NDT.net has revamped its website providing a mobile-friendly design.The front page received a comp
...
letely new design and all other sections are now reacting responsively on mobile devices. This has been a major step to make our website more user- friendly.
>

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

Lyft™: Pulsed Eddy Current Reinvented

PEC Reinvented—CUI Programs Redefined Corrosion under insulation (CUI) is possibly the greatest u
...
nresolved asset integrity problem in the industry. Current methods for measuring wall thickness with liftoff, without removing insulation, all have severe limitations. Eddyfi introduces Lyft — a reinvented, high-performance pulsed eddy current (PEC) solution. The patent- pending system features a state-of-the-art portable instrument, real- time C-scan imaging, fast data acquisition with grid-mapping and dynamic scanning modes, and flexibility with long cables. It can also scan through thick metal and insulation, as well as aluminum, stainless steel, and galvanized steel weather jackets. Who else but Eddyfi to reinvent an eddy current technique and redefine CUI programs. Got Lyft?
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window