where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

2558 views
Technical Discussions
vigneshwaran.g
India, Joined Feb 2016, 4

vigneshwaran.g

India,
Joined Feb 2016
4
13:38 Apr-04-2016
V2 block calibration

As i am new to ndt field. so any one can say me how to do calibrate the v2 block with angle beam probe.......

    
 
 
Anmol Birring
Consultant,
Birring NDE Center, Inc., USA, Joined Aug 2011, 701

Anmol Birring

Consultant,
Birring NDE Center, Inc.,
USA,
Joined Aug 2011
701
20:24 Apr-04-2016
Re: V2 block calibration
In Reply to vigneshwaran.g at 13:38 Apr-04-2016 (Opening).

Did they not teach you in the NDT - UT training class ?

    
 
 
gokul_hrishikesh
NDT Inspector, PCN UT Level 3
India, Joined Jul 2013, 73

gokul_hrishikesh

NDT Inspector, PCN UT Level 3
India,
Joined Jul 2013
73
16:27 Apr-05-2016
Re: V2 block calibration
In Reply to vigneshwaran.g at 13:38 Apr-04-2016 (Opening).

Vigneshwaran,

There will be many videos on YouTube, an ocean of articles on google.
What you are asking is very basic, you should do little study from internet
Regards

    
 
 
vigneshwaran.g
vigneshwaran.g
12:35 Apr-06-2016
Re: V2 block calibration
In Reply to gokul_hrishikesh at 16:27 Apr-05-2016 .

thank u sir. i know i have to study more things in ut. so if u know some articles related to ut pls share with me sir.
thanks & regards
vigneshwaran.

    
 
 
Paul Holloway
Consultant, UT Level 3
Holloway NDT & Engineering Inc , Canada, Joined Apr 2010, 169

Paul Holloway

Consultant, UT Level 3
Holloway NDT & Engineering Inc ,
Canada,
Joined Apr 2010
169
01:17 Apr-07-2016
Re: V2 block calibration
In Reply to vigneshwaran.g at 12:35 Apr-06-2016 .

Vigneshwaran (and all who make broad requests for information without researching first),

Please, please PLEASE start with a simple Google search! By simply entering the subject line, Google returns 3 Youtube videos and one paper (from this site, nonetheless), all in the first 4 hits.

Asking questions and expecting the world to train you on basic UT without first putting in any effort is, well, just lazy.

1    
 
 
Neil Burleigh
Sales
Krautkramer Australia Pty Ltd, Australia, Joined Dec 2002, 153

Neil Burleigh

Sales
Krautkramer Australia Pty Ltd,
Australia,
Joined Dec 2002
153
02:07 Apr-07-2016
Re: V2 block calibration
In Reply to Paul Holloway at 01:17 Apr-07-2016 .

I absolutely and totally agree with Paul, my own google search returned the same results so it is the same for Canada and Australia. Therefore I would hazard a guess that it is the same for India.
I believe the supporters and contributors of this forum are all willing to help but we are not here to hold your hand as you take your first steps. Do not be so lazy, you have these internet search engines to provide you with a raft of knowledge and wealth of information.
I have two new employees about to do their level 1 UT courses next week and I will ensure that they have a basic understanding of UT before doing the training course. One of these things will be getting their head around calibrating angle probes using the V1 and V2 blocks. Guess what after giving them the explanation of the calibration procedure I will get them to review the you tube videos.............

1    
 
 
vigneshwaran.g
India, Joined Feb 2016, 4

vigneshwaran.g

India,
Joined Feb 2016
4
06:25 Apr-07-2016
Re: V2 block calibration
In Reply to Neil Burleigh at 02:07 Apr-07-2016 .

ok sir......i will get from internet source about ut

    
 
 

Product Spotlight

Robotic laser shearography enables 100% inspection of complex, flight-critical composite structures

An article in “Composites World Magazine” showcases Non Destructive Testing of aero-structures
...
with Laser Shearography. Over the years Dantec Dynamics has supplied many solutions for the aerospace industry. Referring to specific customer projects several of these cases are examined to outline the advantages of using Laser Shearography for automated defect detection.
>

GUL QSR1® Scanning

How do you measure pipe wall thickness without direct access to the area? QSR® Scanning - Guide Wav
...
e Quantitative Short Range Scanning.
>

iProbe - USB Phased Array Probe

Turn your PC, Laptop or Tablet into a powerful 32:64 Phased Array system with our USB powered Phas
...
ed Array iProbe and inspection software package. Perform affordable weld inspection and corrosion mapping inspections with this powerful but small system. The probe has a 100V pulser, 8K PRF, dual axis encoder input and achieves outstanding signal quality.
>

NEOS III

NEOS III is Logos Imagings lightest DR system. With a built-in battery and internal wireless commu
...
nication, the NEOS III is perfect for users that want to quickly assess an item.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window