where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
Career Discussions
mansoor ali
India, Joined Jan 2015, 5

mansoor ali

Joined Jan 2015
06:45 Apr-13-2016
implementation of new NDT services and training

My friend was going to start one new NDT service in INDIA.I want to give some ideas to help himself.you people are have lot of experience on this NDT field.so give the ideas to implement one new NDT service.

NOTE.He have only technical knowledge in NDT service.Will you people please give some commercial information about the NDT services.give idea about management,training,services,customer satisfaction,improve the customer base.

nithin kumar a
India, Joined Apr 2016, 2

nithin kumar a

Joined Apr 2016
15:57 Apr-25-2016
Re: implementation of new NDT services and training
In Reply to mansoor ali at 06:45 Apr-13-2016 (Opening).

Dear Mansoor Ali,
I am happy to hear that you have set a plan to start NDT Services in India.I suggest you to contact TWG GROUP/NDT Global regarding your ndt services execution. The above said company having more than 10 years experience in TRAINING, CERTIFICATION, CALIBRATION, NDT SERVICES, METAL TESTING SERVICES for MNC Companies in India.
Please visit and contact www.ndtglobal.in

I strongly hope that you would get appropriate support regarding this.


Product Spotlight

On-Demand Webinar: Advanced Ultrasonic Techniques for HTHA Detection & Assessment

In the Oil and Gas industry, High Temperature Hydrogen Attack (HTHA) can occur in steels operating a
t high temperature, usually above 205°C (400°F). Early stages of HTHA are very difficult to detect. Join us for a webinar presented by Guy Maes, Zetec Sales Engineer Director. The webinar will demonstrate how advanced ultrasonic techniques are deployed for efficient and reliable HTHA inspections.

Micro CT

nanoVoxel series has nano-scale resolution by using high voltage X-ray source (from 80-300 kV) wit
h micro focal spot and highly sensitive detector including different kinds of big size panel detectors and lens coupling CCD.

Eddy Current inspection : RotoETscan Rotating Head

The rotating head RotoETscan detects the presence of longitudinal surface or sub surface defects a
t high speed. The rotating head is often installed directly on the production line. It is generally dedicated to the control of long products such as tubes, bars and wires, made of ferrous or non-ferrous material. It can also be used for inspection of small parts (billets).

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.

We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
this is debug window