where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

4113 views
Career Discussions
vengadesh
Engineering,
Tech Mahindra LTD, India, Joined Mar 2016, 4

vengadesh

Engineering,
Tech Mahindra LTD,
India,
Joined Mar 2016
4
15:17 May-25-2016
what are the certificate required for applying level-III exam

Dear sir,
Have a good day. I have plan to applying ASNT level-III exam. what are the certificate required for applying level-III exam.

 
 Reply 
 
mdkhalid
mdkhalid
18:50 May-27-2016
Re: what are the certificate required for applying level-III exam
In Reply to vengadesh at 15:17 May-25-2016 (Opening).

You need B.tec.

 
 Reply 
 
Heydar Alakbarov
NDT Inspector,
Inspection Services, Inc., USA, Joined May 2016, 8

Heydar Alakbarov

NDT Inspector,
Inspection Services, Inc.,
USA,
Joined May 2016
8
21:11 May-27-2016
Re: what are the certificate required for applying level-III exam
In Reply to mdkhalid at 18:50 May-27-2016 .

zoom image



Attached file are requirements for applying.
1
 
 Reply 
 
Chandrashekhar Thiramdas
Engineering,
Singapore, Joined Mar 2013, 1

Chandrashekhar Thiramdas

Engineering,
Singapore,
Joined Mar 2013
1
10:30 May-30-2016
Re: what are the certificate required for applying level-III exam
In Reply to vengadesh at 15:17 May-25-2016 (Opening).

You need to submit a copy of your academic certificates showing your educational background.

E.g. 1. If your Qualification is either High School or Diploma or Bachelor Degree, then you may need to submit your Marks memo or Diploma or Degree certificate.

2. If your Qualification is either B.Tech or M.Sc or M.Tech then you can submit a copy of Transcripts or Original Degree or Provisional Certificate, etc.

A copy of certificate will be enough to verify your education background.

Coming to EXPERIENCE, you can follow any one of the below item:
1. Get the application form attested by your company HR or your Supervisor declaring your actual experience level in the method you applied for
Or
2. Get an Experience letter from your employer stating that you working AT A LEVEL EQUIVALENT TO SNT-TC-1A level 2 in the methods you applied for
Or
3. If you are independently working, then you can get signature from 2 of your customer to show the experience level in those methods applied.
Or
4. Get it signed by any ASNT NDT level 3 who is aware of your experience level in those method applied for.

So for 1. B.Tech or M.Sc or M.Tech candidates - 1 year experience (equivalent to level - II) is enough.
2. Diploma, ITI or High school - 2 Years experience
3. If education background then you need to show more years of experience to compensate.


Education:
You must attach documentation for education if you are using post-secondary education to meet the Education and Experience Requirements. Copies of diplomas or transcripts are acceptable. All documentation must be in English or accompanied by an English translation.

Education and Experience:
ASNT Level III applicants must satisfy one of the following eligibility criteria:
• Graduated from a minimum four-year college or university curriculum with a degree in engineering or a physical science, plus one year (12 months) of experience in nondestructive testing in an assignment comparable to that of an Level II in the applicable test method(s), as defined in ASNT’s Recommended Practice No. SNT-TC-1A, latest edition; OR
• Completed with passing grades at least two full academic school years of engineering or a physical science study at a university, college, or technical school, plus two years (24 months) of experience in nondestructive testing in an assignment comparable to that of an Level II in the applicable test method(s), as defined in ASNT’s Recommended Practice No. SNT-TC-1A, latest edition; OR
• Four years (48 months) of experience in an assignment at least comparable to that of an Level II in the applicable testmethod(s), as defined in ASNT’s Recommended Practice No. SNT-TC-1A, latest edition.

Have a look into application and ASNT website, will get more information.

Thank you
All the best

1
 
 Reply 
 
sibu
NDT Inspector,
contractor staff at punj lloyd ltd, India, Joined Mar 2016, 27

sibu

NDT Inspector,
contractor staff at punj lloyd ltd,
India,
Joined Mar 2016
27
18:26 May-30-2016
Re: what are the certificate required for applying level-III exam
In Reply to Chandrashekhar Thiramdas at 10:30 May-30-2016 .

Dead Chandra sekar,
Plz.explain about that Basic.exam , actually I know Ut, Pt,Mpt . I don't about Rt its possible to neglect for level 3 basis exam or I need to study all methods of ndt

 
 Reply 
 
Pradeep Boddu
NDT Inspector,
K-KEM , India, Joined Feb 2016, 32

Pradeep Boddu

NDT Inspector,
K-KEM ,
India,
Joined Feb 2016
32
13:55 Jul-23-2018
Re: what are the certificate required for applying level-III exam
In Reply to vengadesh at 15:17 May-25-2016 (Opening).

Hello,
Any one explain about the latest requirements for applying L III exam.

Thanks

 
 Reply 
 
vignesh
India, Joined Jul 2018, 3

vignesh

India,
Joined Jul 2018
3
08:47 Jul-24-2018
Re: what are the certificate required for applying level-III exam
In Reply to Pradeep Boddu at 13:55 Jul-23-2018 .

i have BE.course complete certificate can you apply the level 3 exam

 
 Reply 
 
Satish
Satish
15:20 Jul-24-2018
Re: what are the certificate required for applying level-III exam
In Reply to vignesh at 08:47 Jul-24-2018 .

You cannot apply with just a course completion certificate. With B.E you'd need atleast 2 years of experience in the method you are applying for.

 
 Reply 
 
William A Jensen
Other,
IHI Southwest Technologies, Inc., USA, Joined May 2017, 67

William A Jensen

Other,
IHI Southwest Technologies, Inc.,
USA,
Joined May 2017
67
16:35 Jul-24-2018
Re: what are the certificate required for applying level-III exam
In Reply to sibu at 18:26 May-30-2016 .

You have to pass the Basic exam in order to get your ASNT Level III in any discipline. Not only do you need to study the various methods to have a basic understanding of the various methods. You also need to have a very comprehensive understanding of materials and processes.

 
 Reply 
 

Product Spotlight

Extended Range Variable Wall® Piping Calibration Blocks for Longseam Inspection

This set of two blocks has been specially designed for situations where ultrasonic examination tak
...
es place circumferentially or “around the curve” for applications such as inspection of longseam welds in piping and vessels. Jointly designed by PH Tool and Holloway NDT, the blocks feature side-drilled hole reflectors positioned within novel compound-curves, each with multiple thickness steps. The unique design results in a light and compact form factor, with the largest block weighing just over 15 lbs and spanning just 16 ¾”. Coverage is provided for nominal pipe sizes from 6” to 10” in the small block and 12” to a whopping 56” in the large block. The compound OD curves and multiple wall thicknesses actually exceed ASME requirements, providing exceptional signal response and measurement accuracy. Properly managing beam divergence off the ID and stabilizing beam skew due to probe rocking is essential to maintaining a consistent calibration when inspecting lengthwise on curved surfaces.
>

Sci Aps Z-Series Portable Handheld Analysers

The world’s only handheld analyzer that measures carbon content in stainless (yes even L-grades),s
...
teels, and cast irons. Also accepted for low Si analysis for sulfidic corrosion analysis, and is widely used in the power industry for Cr analysis, for flow accelerated corrosion applications.
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

TraiNDE UT

TraiNDE UT is a virtual tool associated with a signal database which simulates real inspection con
...
ditions for numerous applications (Type A/V1 block, DAC block, welds and plates).
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window