where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
824 views
Technical Discussions
Phil Harper
Director, Tribosonics
Tribosonics Ltd, United Kingdom, Joined Feb 2004, 10

Phil Harper

Director, Tribosonics
Tribosonics Ltd,
United Kingdom,
Joined Feb 2004
10
03:16 Feb-17-2004
Piezo crystal centre frequency

Hi,
A rather basic question i fear, but i don't have an answer at the moment.
I have got a piezo-ceramic crystal that is 1mm thick and 16mm diameter. I simply want to work out what the centre frequency of it is?

Any ideas?

Thanks


 
 Reply 
 
Paul A. Meyer
R & D,
GE Inspection Technologies, USA, Joined Nov 1998, 47

Paul A. Meyer

R & D,
GE Inspection Technologies,
USA,
Joined Nov 1998
47
05:47 Feb-17-2004
Re: Piezo crystal centre frequency
Hi Phil,
The product of the thickness and the resonant frequency is usually a constant, in this case it is called the thickness frequency constant. PZTs usually have a value around 2000 Hz-m. Dividing this value by the thickness (.001 m) yields the resonant frequency ~ 2 MHz. In you situation, you should identify the material, then obtain the frequency constant from the manufacturer, then perform the above calculation. Because the material can resonate in other directions (other modes), ensure that you ask the manufacturer for the "thickness frequency constant".
Alternatively, you can measure the actual resonance of the piece by plotting its impedance spectrum or inspecting it with an ultrasound instrument, but the calculation is easier.
I hope this helps.
Paul


----------- Start Original Message -----------
: Hi,
: A rather basic question i fear, but i don't have an answer at the moment.
: I have got a piezo-ceramic crystal that is 1mm thick and 16mm diameter. I simply wantto work out what the centre frequency of it is?
: Any ideas?
: Thanks
------------ End Original Message ------------




 
 Reply 
 
shan
shan
02:03 Jun-20-2005
Fr Vs G
what happens if the value of G (mS) is very low in a transducer?


 
 Reply 
 

Product Spotlight

ISONIC 3510

Very Powerful Superior Performance Extremely Portable Smart Phased Array Ultrasonic Flaw Detector an
...
d Recorder with 2 Conventional UT and TOFD Channels uniquely combines PA, single- and multi-channel conventional UT, and TOFD modalities providing 100% raw data recording and imaging. Suitable for all kinds of every-day ultrasonic inspections
>

iProbe - USB Phased Array Probe

Turn your PC, Laptop or Tablet into a powerful 32:64 Phased Array system with our USB powered Phas
...
ed Array iProbe and inspection software package. Perform affordable weld inspection and corrosion mapping inspections with this powerful but small system. The probe has a 100V pulser, 8K PRF, dual axis encoder input and achieves outstanding signal quality.
>

Cygnus 6+ PRO Multi-Mode Ultrasonic Thickness Gauge

The Cygnus 6+ PRO thickness gauge is the most advance gauge within the Cygnus range with key featu
...
res including: comprehensive data logging; A-scan and B-scan display; manual gain control; Bluetooth connectivity; and much more. With its unique dual display and three measuring modes (Multiple-Echo, Echo-Echo and Single-Echo), this surface thickness gauge offers maximum versatility for inspections.
>

FAAST-PA! OEM Patented phased Array for high speed UT inspection

Multiangle, Multifocus, Multifrequency, Multibeam. Instead of stacking UT electronics and having m
...
any PA probes, FAAST-PA is able to transmit all delay laws within ONE single shot in Real time.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window