where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
640 views
Technical Discussions
UKUEVO FRANCIS
NDT Inspector, QA/QC OFFICER
ROMSON OILFIELD SERVICES, Nigeria, Joined Aug 2014, 5

UKUEVO FRANCIS

NDT Inspector, QA/QC OFFICER
ROMSON OILFIELD SERVICES,
Nigeria,
Joined Aug 2014
5
17:06 Jul-12-2016
INSPECTION PROCEDURE FOR CHAIN SLING

PLEASE CAN SOMEONE GIVE ME INSPECTION PROCEDURE FOR CHAIN SLINGS? BS EN 818-6:2000+AI:2008* PLEASE HELP ME OUT.

 
 Reply 
 
Manuel Haces
Director, - Wire rope inspection
Haces Inspección del Noreste and Wire Rope Inspection, Mexico, Joined Jun 2002, 123

Manuel Haces

Director, - Wire rope inspection
Haces Inspección del Noreste and Wire Rope Inspection,
Mexico,
Joined Jun 2002
123
18:39 Jul-12-2016
Re: INSPECTION PROCEDURE FOR CHAIN SLING
In Reply to UKUEVO FRANCIS at 17:06 Jul-12-2016 (Opening).

Basically you have to measure the connections points between each chain element, to find out reduction of diameter. Then if in doubt use magnetic particle. But it depends of the Code. You can send me an email to correo@manuelhaces.com to give you a proposal or advise in how to do it. Regards

 
 Reply 
 

Product Spotlight

CIVA 2020 UT Module

CIVA NDE Simulation Software is the world leader of NDT Simulation. The UT simulation Module incl
...
udes: - "Beam computation": Beam propagation simulation - "Inspection Simulation": Beam interaction with flaws or specimens The user can simulate a whole inspection process (pulse echo, tandem or TOFD) with a wide range of probes (conventional, Phased- arrays or EMAT), components, and flaws.
>

Teletest Focus+

Teletest Focus+ electronics have superior capabilities than rivals on the market. Beyond the usual
...
test features, Focus+ has 24 transmit channels and 24 receive channels, with an additional on-board switching capabilities. The instrument's frequency range is 10–300 kHz.
>

MUSE Mobile Ultrasonic Equipment

The MUSE, a portable ultrasonic imaging system, was developed for in-field inspections of light-weig
...
ht structures. The MUSE consists of a motor-driven manipulator, a water circulation system for the acoustic coupling and a portable ultrasonic flaw detector (USPC 3010). The MUSE provides images of internal defects (A-, B-,C- and D-scan).
>

FD800 Bench Top Flaw Detectors

The bench-top FD800 flaw detector range combines state-of-the-art flaw detection with advanced mater
...
ial thickness capabilities. Designed for use in the laboratory these gauges are the tool you need for all your flaw detecting needs.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window