where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

1099 views
Technical Discussions
Rajan
India, Joined Jul 2016, 2

Rajan

India,
Joined Jul 2016
2
18:10 Jul-21-2016
UT not possible im UT

Why UT not possible in Stainless steel.

 
 Reply 
 
Ian S
Ian S
20:04 Jul-21-2016
Re: UT not possible im UT
In Reply to Rajan at 18:10 Jul-21-2016 (Opening).

Where did you find that little gem of information ?

 
 Reply 
 
massimo carminati
Consultant, AUT specialist
IMG Ultrasuoni Srl, Italy, Joined Apr 2007, 691

massimo carminati

Consultant, AUT specialist
IMG Ultrasuoni Srl,
Italy,
Joined Apr 2007
691
08:19 Jul-24-2016
Re: UT not possible im UT
In Reply to Rajan at 18:10 Jul-21-2016 (Opening).

Is just more difficult but not impossible.

 
 Reply 
 
srinivas
NDT Inspector,
kalva engineers pvt ltd, India, Joined Oct 2012, 35

srinivas

NDT Inspector,
kalva engineers pvt ltd,
India,
Joined Oct 2012
35
09:01 Jul-25-2016
Re: UT not possible im UT
In Reply to Rajan at 18:10 Jul-21-2016 (Opening).

because of grain structure, attenuation but it is not impossible to do ut on stainless steel

 
 Reply 
 
srinivas
NDT Inspector,
kalva engineers pvt ltd, India, Joined Oct 2012, 35

srinivas

NDT Inspector,
kalva engineers pvt ltd,
India,
Joined Oct 2012
35
09:04 Jul-25-2016
Re: UT not possible im UT
In Reply to Rajan at 18:10 Jul-21-2016 (Opening).

sir

when i am doing mpt on railway springs with central conductor,pie indicator showing indications when kept at edges of spring but no such indications when kept at middle of spring
i understood the concept at flux leakage at ends but please explain why it is not at middle
current given as per requirement ie 1000 amps per 1 " dia

 
 Reply 
 

Product Spotlight

Cygnus 6+ PRO Multi-Mode Ultrasonic Thickness Gauge

The Cygnus 6+ PRO thickness gauge is the most advance gauge within the Cygnus range with key featu
...
res including: comprehensive data logging; A-scan and B-scan display; manual gain control; Bluetooth connectivity; and much more. With its unique dual display and three measuring modes (Multiple-Echo, Echo-Echo and Single-Echo), this surface thickness gauge offers maximum versatility for inspections.
>

NDTkit RT

NDTkit RT, TESTIA's Digital Radiography software The NDTkit product line software for X-ray analysi
...
s. NDTkit RT is a software benefiting from the Ultis kernel which is dedicated to radiographic image analysis. It offers a set of tools and filtering processes to assist RT operators in finding relevant flaws.
>

Echomac® PA Tube Weld Tester

The new robotic Echomac® PA TW is an operator friendly test system for detecting weld zone defects
...
in tube and pipe caused by scarfing or welding processes. Electronic scanning ensures that the entire weld zone is covered without the need for mechanical movement or operator adjustment.
>

NEW Wheel Type Phased Array Probe

DOPPLER NEW Wheel Type Phased Array Probe, more stable, new tyre makes lesser acoustic attenuation
...
, much lighter makes easier to handle, more slim size, magnetic and mechanical encoder optional etc...more
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window