where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

1110 views
Technical Discussions
David LAVASTRE
Engineering,
EDF CEIDRE, France, Joined Nov 2003, 11

David LAVASTRE

Engineering,
EDF CEIDRE,
France,
Joined Nov 2003
11
08:07 Mar-18-2004
Phased array manufacturers

Hi everybody !
I'm looking for circular phased array probes and instruments manufacturers (for a study).
Can someone help me ?
Thanks.

David


 
 Reply 
 
J. Mark Davis
Teacher, And Consultant
University of Ultrasonics, Birmingham, Alabama, USA, Joined Mar 2000, 85

J. Mark Davis

Teacher, And Consultant
University of Ultrasonics, Birmingham, Alabama,
USA,
Joined Mar 2000
85
03:35 Mar-18-2004
Re: Phased array manufacturers
David,

For an circular array contact the following at Structural Integrity.

Harold Queen hqueen@structint.com

or Larry Nottingham lnotting@structint.com

SI has a patented Circular Array System.

Sincerely,

J. Mark Davis

----------- Start Original Message -----------
: Hi everybody !
: I'm looking for circular phased array probes and instruments manufacturers (for a study).
: Can someone help me ?
: Thanks.
: David
------------ End Original Message ------------




 
 Reply 
 
Joerg Schulze-Clewing
Joerg Schulze-Clewing
09:59 Mar-18-2004
Re: Phased array manufacturers
Does it have to be phased array? What frequency, size
etc. are you looking for?

Can you share something about the application? That would
help us figure what might be suitable. Med electronics
has circular devices (intraluminal and intravascular
ultrasound).

Regards, Joerg.

----------- Start Original Message -----------
: Hi everybody !
: I'm looking for circular phased array probes and instruments manufacturers (for a study).
: Can someone help me ?
: Thanks.
: David
------------ End Original Message ------------




 
 Reply 
 
Dave Stewart
Dave Stewart
06:28 Mar-19-2004
Re: Phased array manufacturers
Hi David,

If you contact RD Tech they have PA transducers as well as instruments www.rd-tech.com , there are contact names there that can help you out.

Take care and have fun

Dave


 
 Reply 
 
Randy Plis
Sales, Consultant
AMDATA NDE Technology LLC, USA, Joined Oct 1999, 23

Randy Plis

Sales, Consultant
AMDATA NDE Technology LLC,
USA,
Joined Oct 1999
23
09:32 Apr-01-2004
Re: Phased array manufacturers
The makers of the AMDATA IntraSpect product line provide user friendly phased array imaging systems. For additional details, please see the exhibit stand for AMDATA NDE Technology, or go to our home page.


 
 Reply 
 

Product Spotlight

PAUT Probes

Typical Phased Array probes have frequencies between 1MHz and 20MHz and the number of wafers is 10
...
to 128. M2 Electronics offers customers conventionally ultrasound probes and the ability to provide high-precision Phased Array Ultrasound Probes of up to 256 wafers. We can also customize the probe for our customers to meet the specific application requirements of the user.
>

Research and Application Development For NDT

Acuren’s Research and Application Development specializes in the development of advanced ultraso
...
nic inspection techniques and systems for challenging inspection applications, with an emphasis on practical solutions which are field deployable. Services include manual and automated ultrasonic inspection system development, inspection technique optimization using laboratory scale studies and ultrasonic modeling (CIVA, BeamTool), preparing technical justification for technique evaluation and qualification (Probability of Detection and sizing accuracy studies), inspection/calibration/analysis procedure preparation to support field deployment of custom techniques, and development of custom imaging algorithms to support challenging inspection applications.
>

Immersion systems

ScanMaster ultrasonic immersion systems are designed for high throughput, multi shift operation in a
...
n industrial or lab environment. These fully integrated systems provide various scanning configurations and incorporate conventional and phased arrays technologies to support diverse applications, such as inspection of disks, bars, shafts, billets and plates. All of ScanMaster immersion systems are built from high accuracy scanning frames allowing for scanning of complex parts and include a multi-channel ultrasonic instrument with exceptional performance. The systems are approved by all major manufacturers for C-scan inspection of jet engine forged discs. Together with a comprehensive set of software modules these flexible series of systems provide the customer with the best price performance solutions.
>

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window