where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
989 views
Technical Discussions
mayur
India, Joined Sep 2016, 3

mayur

India,
Joined Sep 2016
3
19:14 Sep-24-2016
aspect ratio in ut

What is aspect ratio in ut. Please explain in brief. I not understand acceptance criteria as per aspect ratio in ut.please explain with examples

 
 Reply 
 
Anmol Birring
Consultant,
Birring NDE Center, Inc., USA, Joined Aug 2011, 805

Anmol Birring

Consultant,
Birring NDE Center, Inc.,
USA,
Joined Aug 2011
805
01:52 Sep-25-2016
Re: aspect ratio in ut
In Reply to mayur at 19:14 Sep-24-2016 (Opening).

Please be more specific on what are you referring to

 
 Reply 
 
Nigel Armstrong
Engineering, - Specialist services
United Kingdom, Joined Oct 2000, 1096

Nigel Armstrong

Engineering, - Specialist services
United Kingdom,
Joined Oct 2000
1096
09:23 Sep-25-2016
Re: aspect ratio in ut
In Reply to mayur at 19:14 Sep-24-2016 (Opening).

Mayur

Have you used this forum's search facility (top right of this screen) to search previous forum posts for 'aspect ratio'. There is sufficient information there to make clear what the term denotes.

 
 Reply 
 
Mohseen Shaikh
Mohseen Shaikh
08:54 Sep-26-2016
Re: aspect ratio in ut
In Reply to mayur at 19:14 Sep-24-2016 (Opening).

Dear mayur,

Are you talking about acceptance criteria Given in Sec. VIII Div 2 Table 10/11?

 
 Reply 
 

Product Spotlight

Micro CT

nanoVoxel series has nano-scale resolution by using high voltage X-ray source (from 80-300 kV) wit
...
h micro focal spot and highly sensitive detector including different kinds of big size panel detectors and lens coupling CCD.
>

UCI Hardness Tester NOVOTEST T-U2

UCI hardness tester NOVOTEST T-U2 is is used for non-destructive hardness testing of: metals and
...
alloys by scales of hardness: Rockwell (HRC), Brinell (HB), Vickers (HV); non-ferrous metals, alloys of iron etc., and using five additional scales for calibration; with tensile strength (Rm) scale determines the tensile strength of carbon steel pearlitic products by automatic recalculation from Brinell (HB) hardness scale.
>

IRIS 9000Plus - Introducing the next generation of heat exchanger inspection.

Representing the seventh generation of the IRIS system, the IRIS 9000 Plus has nearly 200 years of c
...
ombined field inspection experience incorporated in its design. This experience combined with a strong commitment to quality and a history of innovation has made Iris Inspection Services® the undisputed leader in IRIS technology.
>

32:128PR PAUT & 2-ch TOFD Flaw Detector: SyncScan 2

●32:128PR PAUT with optional 2-ch TOFD to maximize your efficiency ●Support PR mode for corrosi
...
on inspection ●Multiple solutions for welds & corrosion ●Faster scan speed (Approximately 3 meters/minute) ●Light weight: 4kg only including battery
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window