where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Airstar Inc.
Application of the newest technologies, such as air-coupled ultrasound, digital instrumentation, signal processing, and transducer technology.
1050 views
Career Discussions
GHULAM HUSAIN
NDT Inspector, NDT Levlel IIII
Oman, Joined Oct 2015, 8

GHULAM HUSAIN

NDT Inspector, NDT Levlel IIII
Oman,
Joined Oct 2015
8
09:27 Dec-22-2016
NDT Lev-III qualificatio requirements as per SNT TC 1A 2006 and 2011 Edition
Download

Hi All,

Before I post the attached query to the ASNT. Can I have some comment from you.

 
 Reply 
 
Dent
Consultant, NDE Manager NDELevel III/3
NDT Consultant, Canada, Joined Nov 1998, 250

Dent

Consultant, NDE Manager NDELevel III/3
NDT Consultant,
Canada,
Joined Nov 1998
250
22:03 Dec-22-2016
Re: NDT Lev-III qualificatio requirements as per SNT TC 1A 2006 and 2011 Edition
In Reply to GHULAM HUSAIN at 09:27 Dec-22-2016 (Opening).

What is your specific question?

 
 Reply 
 
Dent
Consultant, NDE Manager NDELevel III/3
NDT Consultant, Canada, Joined Nov 1998, 250

Dent

Consultant, NDE Manager NDELevel III/3
NDT Consultant,
Canada,
Joined Nov 1998
250
01:44 Dec-23-2016
Re: NDT Lev-III qualificatio requirements as per SNT TC 1A 2006 and 2011 Edition
In Reply to GHULAM HUSAIN at 09:27 Dec-22-2016 (Opening).

What is your specific question?

 
 Reply 
 
Nigel Armstrong
Engineering, - Specialist services
United Kingdom, Joined Oct 2000, 1096

Nigel Armstrong

Engineering, - Specialist services
United Kingdom,
Joined Oct 2000
1096
12:09 Dec-23-2016
Re: NDT Lev-III qualificatio requirements as per SNT TC 1A 2006 and 2011 Edition
In Reply to Dent at 22:03 Dec-22-2016 .

SNT-TC-1A are recommendations not requirements. The only requirement is for a Written Practice but it doesnt prescribe what that contains. İts what your client accepts that matters.

 
 Reply 
 
Care Labs
United Arab Emirates (UAE), Joined Dec 2016, 2

Care Labs

United Arab Emirates (UAE),
Joined Dec 2016
2
09:46 Dec-26-2016
Re: NDT Lev-III qualificatio requirements as per SNT TC 1A 2006 and 2011 Edition
In Reply to Nigel Armstrong at 12:09 Dec-23-2016 .

Make a better study of the work with the comparison and modification.

 
 Reply 
 

Product Spotlight

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

Conformable wedge transducer

The conformability is obtained with a flexible membrane filled with water between the transducer and
...
the inspected component. The coupling between the membrane and the component requires a small quantity of water or couplant. The conformable wedge combines the acoustic performance of immersion technique with good coupling and low attenuation.
>

NDTkit RT

NDTkit RT, TESTIA's Digital Radiography software The NDTkit product line software for X-ray analysi
...
s. NDTkit RT is a software benefiting from the Ultis kernel which is dedicated to radiographic image analysis. It offers a set of tools and filtering processes to assist RT operators in finding relevant flaws.
>

TESTD-PT SYSTEM

Pulse thermography is a non-contact test method that is ideal for the characterization of thin fil
...
ms and coatings or the detection of defects. With a remarquable short test time and a high detection sensitivity, the Telops TESTD-PT is the perfect tool for non- destructive testing. With such high frame rates, it is even possible to investigate highly conductive or diffusive materials.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window