where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Airstar Inc.
Application of the newest technologies, such as air-coupled ultrasound, digital instrumentation, signal processing, and transducer technology.
1404 views
Career Discussions
Didier
France, Joined Jan 2017, 4

Didier

France,
Joined Jan 2017
4
20:58 Jan-24-2017
GE NDT QUALIFICATION

is there any UT III LEVEL who did training and exam at GE USA?

 
 Reply 
 
Dent
Consultant, NDE Manager NDELevel III/3
NDT Consultant, Canada, Joined Nov 1998, 250

Dent

Consultant, NDE Manager NDELevel III/3
NDT Consultant,
Canada,
Joined Nov 1998
250
23:24 Jan-24-2017
Re: GE NDT QUALIFICATION
In Reply to Didier at 20:58 Jan-24-2017 (Opening).

I did it a few years ago. What do you need?

 
 Reply 
 
Didier
France, Joined Jan 2017, 4

Didier

France,
Joined Jan 2017
4
06:45 Jan-25-2017
Re: GE NDT QUALIFICATION
In Reply to Dent at 23:24 Jan-24-2017 .

I know there is a specific and a pratical exam.
What is the specific written exam about?
General about ut knowledge or something about their specs?
Thanks

 
 Reply 
 
Dent
Consultant, NDE Manager NDELevel III/3
NDT Consultant, Canada, Joined Nov 1998, 250

Dent

Consultant, NDE Manager NDELevel III/3
NDT Consultant,
Canada,
Joined Nov 1998
250
02:27 Jan-26-2017
Re: GE NDT QUALIFICATION
In Reply to Didier at 06:45 Jan-25-2017 .

Are you going for P3C AG 42? Greenville SC. 10 hours of training by Stephen Grant. Very nice guy. Exam is next day. I had a very large rotor to inspect only one segment of it. Make sure you are comfortable with your attenuators checks.
It was 11 years ago when I did it so maybe things have changed.
Good luck

 
 Reply 
 
Didier
France, Joined Jan 2017, 4

Didier

France,
Joined Jan 2017
4
06:42 Jan-26-2017
Re: GE NDT QUALIFICATION
In Reply to Dent at 02:27 Jan-26-2017 .

For the moment i'm just analyzing specification for a possible PO.
But I don't understand if there is also a written exam and if yes what's the topics of it.
10 hours training about what?
I need to understant , in case , Who can be the right operator to send for this qualification.
Thanks a lot

 
 Reply 
 
Didier
France, Joined Jan 2017, 4

Didier

France,
Joined Jan 2017
4
20:16 Jan-26-2017
Re: GE NDT QUALIFICATION
In Reply to Dent at 02:27 Jan-26-2017 .

For the moment i'm just analyzing specification for a possible PO.
But I don't understand if there is also a written exam and if yes what's the topics of it.
10 hours training about what?
I need to understant , in case , Who can be the right operator to send for this qualification.
Thanks a lot

 
 Reply 
 
Dent
Consultant, NDE Manager NDELevel III/3
NDT Consultant, Canada, Joined Nov 1998, 250

Dent

Consultant, NDE Manager NDELevel III/3
NDT Consultant,
Canada,
Joined Nov 1998
250
00:04 Jan-29-2017
Re: GE NDT QUALIFICATION
In Reply to Didier at 20:16 Jan-26-2017 .

Training is all about the procedure and how to interpret it, and use it. Yes there is also a written exam. Send your level III because he needs to make techniques for the level II techs.

 
 Reply 
 

Product Spotlight

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

NEW - TD Focus-ScanRX

The NEW Next Generation Advanced UT platform, TD Focus ScanRX - Also available as a card stack solut
...
ion. Key Improvements 1. Data acquisition is significantly faster than current design 2. Better aesthetic – closely aligns with HandyScan RX 3. Improved IP rating (Target IP66) 4. Ruggedized housing 5. Connectors are protected from impact and ingress 6. Integrated stand and separate retractable handle easy to keep clean) 7. Touchscreen with ruggedized display glass 8. 3-Axis encoder input
>

UCI Hardness Tester NOVOTEST T-U2

UCI hardness tester NOVOTEST T-U2 is is used for non-destructive hardness testing of: metals and
...
alloys by scales of hardness: Rockwell (HRC), Brinell (HB), Vickers (HV); non-ferrous metals, alloys of iron etc., and using five additional scales for calibration; with tensile strength (Rm) scale determines the tensile strength of carbon steel pearlitic products by automatic recalculation from Brinell (HB) hardness scale.
>

EKOSCAN Phased Array

In order to always fit your needs, EKOSCAN can manufacture any type of UT transducer, either convent
...
ional or Phased Array. As an ISO 9001: 2015 certified company, EKOSCAN is extremely careful as far a material selection and manufacturing processes are concerned. Our probes guarantee our customers the benefits of latest innovations regarding piezo-composite, backing, impedance adaptation layer, etc. Specific probes for hostile environment: high temperature, high pressure, corrosive environment,etc. Specific probes designed to fit your specific application: optimization of every parameter to guarantee you the best detection.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window