where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Volume Graphics GmbH
By choosing Volume Graphics software, you can rely on more than 20 years of experience in the development of software for non-destructive testi ...
1410 views
Career Discussions
Didier
France, Joined Jan 2017, 4

Didier

France,
Joined Jan 2017
4
20:58 Jan-24-2017
GE NDT QUALIFICATION

is there any UT III LEVEL who did training and exam at GE USA?

 
 Reply 
 
Dent
Consultant, NDE Manager NDELevel III/3
NDT Consultant, Canada, Joined Nov 1998, 250

Dent

Consultant, NDE Manager NDELevel III/3
NDT Consultant,
Canada,
Joined Nov 1998
250
23:24 Jan-24-2017
Re: GE NDT QUALIFICATION
In Reply to Didier at 20:58 Jan-24-2017 (Opening).

I did it a few years ago. What do you need?

 
 Reply 
 
Didier
France, Joined Jan 2017, 4

Didier

France,
Joined Jan 2017
4
06:45 Jan-25-2017
Re: GE NDT QUALIFICATION
In Reply to Dent at 23:24 Jan-24-2017 .

I know there is a specific and a pratical exam.
What is the specific written exam about?
General about ut knowledge or something about their specs?
Thanks

 
 Reply 
 
Dent
Consultant, NDE Manager NDELevel III/3
NDT Consultant, Canada, Joined Nov 1998, 250

Dent

Consultant, NDE Manager NDELevel III/3
NDT Consultant,
Canada,
Joined Nov 1998
250
02:27 Jan-26-2017
Re: GE NDT QUALIFICATION
In Reply to Didier at 06:45 Jan-25-2017 .

Are you going for P3C AG 42? Greenville SC. 10 hours of training by Stephen Grant. Very nice guy. Exam is next day. I had a very large rotor to inspect only one segment of it. Make sure you are comfortable with your attenuators checks.
It was 11 years ago when I did it so maybe things have changed.
Good luck

 
 Reply 
 
Didier
France, Joined Jan 2017, 4

Didier

France,
Joined Jan 2017
4
06:42 Jan-26-2017
Re: GE NDT QUALIFICATION
In Reply to Dent at 02:27 Jan-26-2017 .

For the moment i'm just analyzing specification for a possible PO.
But I don't understand if there is also a written exam and if yes what's the topics of it.
10 hours training about what?
I need to understant , in case , Who can be the right operator to send for this qualification.
Thanks a lot

 
 Reply 
 
Didier
France, Joined Jan 2017, 4

Didier

France,
Joined Jan 2017
4
20:16 Jan-26-2017
Re: GE NDT QUALIFICATION
In Reply to Dent at 02:27 Jan-26-2017 .

For the moment i'm just analyzing specification for a possible PO.
But I don't understand if there is also a written exam and if yes what's the topics of it.
10 hours training about what?
I need to understant , in case , Who can be the right operator to send for this qualification.
Thanks a lot

 
 Reply 
 
Dent
Consultant, NDE Manager NDELevel III/3
NDT Consultant, Canada, Joined Nov 1998, 250

Dent

Consultant, NDE Manager NDELevel III/3
NDT Consultant,
Canada,
Joined Nov 1998
250
00:04 Jan-29-2017
Re: GE NDT QUALIFICATION
In Reply to Didier at 20:16 Jan-26-2017 .

Training is all about the procedure and how to interpret it, and use it. Yes there is also a written exam. Send your level III because he needs to make techniques for the level II techs.

 
 Reply 
 

Product Spotlight

NOVO Armor 15 & NOVO Armor 22

The Armor Kit Contains the NOVO Armor, which provides additional mechanical protection to the NOVO 1
...
5WN & NOVO 22WN Detectors, the Armor Stand and a traveling soft cover. - Newest shock absorbent technology case - Water resistant design - Supports wired & wireless communication - Multiple positioning options - Tripod connection using the Built-in 1/4” threads - Simple Detector battery replacement
>

Immersion systems

ScanMaster ultrasonic immersion systems are designed for high throughput, multi shift operation in a
...
n industrial or lab environment. These fully integrated systems provide various scanning configurations and incorporate conventional and phased arrays technologies to support diverse applications, such as inspection of disks, bars, shafts, billets and plates. All of ScanMaster immersion systems are built from high accuracy scanning frames allowing for scanning of complex parts and include a multi-channel ultrasonic instrument with exceptional performance. The systems are approved by all major manufacturers for C-scan inspection of jet engine forged discs. Together with a comprehensive set of software modules these flexible series of systems provide the customer with the best price performance solutions.
>

AIS229 - Multipurpose Real Time System

Latest standard & automatic real time system developed by Balteau. The AIS229 has been designed to
...
do series inspection in a wide variety of industry. Composed of a shielded cabinet, 5 axis manipulator, x-ray generator and tubehead from 160kV to 225kV, a fl at panel & much more, the AIS229 is most certainly one of the most multipurpose RTR system available on the market.
>

NovaScope 6000

The all-digital Novascope 6000 is a portable, ultra-high precision thickness gauge for high-speed
...
thickness measurement. Novascope 6000 has unmatched capabilities and unique features including: •Superior Resolution with high contrast, high-speed color RF display •High pulser voltage •Real-time video output •Increased internal/external data storage •Programmable SetUp features •Battery & AC Powered
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window