where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

TecScan Systems
We offer a complete line of NDT scanners, Immersion Tanks & Gantry systems which incorporate Ultrasonic, Phased Array & Eddy Current technologies.
6181 views
Technical Discussions
NAT
Engineering, Chief Examiner -NDT Manager
SGS EGYPT, Singapore, Joined Jan 2002, 4

NAT

Engineering, Chief Examiner -NDT Manager
SGS EGYPT,
Singapore,
Joined Jan 2002
4
05:19 May-16-2004
Authorized Inspector


Can the forum members guide me how to apply for AI certification , OUTSIDE USA.


 
 Reply 
 
vernon ward
vernon ward
05:16 May-17-2004
Re: Authorized Inspector
----------- Start Original Message -----------
:
: Can the forum members guide me how to apply for AI certification , OUTSIDE USA.
------------ End Original Message ------------

Contact John O'Brien at obirc@aol.com

He holds very informative training courses on API 510, API 653 and API 570 outside the USA. He can tell you all you need to know.




 
 Reply 
 
NAT
Engineering, Chief Examiner -NDT Manager
SGS EGYPT, Singapore, Joined Jan 2002, 4

NAT

Engineering, Chief Examiner -NDT Manager
SGS EGYPT,
Singapore,
Joined Jan 2002
4
09:21 May-30-2004
Re: Authorized Inspector
----------- Start Original Message -----------
: :
: : Can the forum members guide me how to apply for AI certification , OUTSIDE USA.
: Contact John O'Brien at obirc@aol.com
: He holds very informative training courses on API 510, API 653 and API 570 outside the USA. He can tell you all you need to know.

Thank you for the information
------------ End Original Message ------------




 
 Reply 
 
llpcode
NDT Inspector
Shaw Group, USA, Joined Jan 2004, 3

llpcode

NDT Inspector
Shaw Group,
USA,
Joined Jan 2004
3
03:18 Jun-08-2004
Re: Authorized Inspector
----------- Start Original Message -----------
: : :
: : : Can the forum members guide me how to apply for AI certification , OUTSIDE USA.
: : Contact John O'Brien at obirc@aol.com
: : He holds very informative training courses on API 510, API 653 and API 570 outside the USA. He can tell you all you need to know.
: Thank you for the information
------------ End Original Message ------------

Actually, an ASME Authorized Inspector is different than an Inspector certified under API provisions.

You would need to be in the employment of an ASME Authorized Inspection Agency or a Juridiction to be able to take the NAtional Board examination.

Better to contact the National Board at 614-888-8320 and get clear information.


 
 Reply 
 
NAT
NAT
06:20 Jun-14-2004
Re: Authorized Inspector
----------- Start Original Message -----------
: : : :
: : : : Can the forum members guide me how to apply for AI certification , OUTSIDE USA.
: : : Contact John O'Brien at obirc@aol.com
: : : He holds very informative training courses on API 510, API 653 and API 570 outside the USA. He can tell you all you need to know.
: : Thank you for the information
: Actually, an ASME Authorized Inspector is different than an Inspector certified under API provisions.
: You would need to be in the employment of an ASME Authorized Inspection Agency or a Juridiction to be able to take the NAtional Board examination.
: Better to contact the National Board at 614-888-8320 and get clear information.
------------ End Original Message ------------
Gentle men
Thanks for the info, NB did confirm that only AIA,Juridiction, user/owner can apply for examination.
Any AIAs interested in a volunteer who want to become an AI ?




 
 Reply 
 
Omar Kiptui
Omar Kiptui
02:45 Jun-14-2005
Re: Authorized Inspector
----------- Start Original Message -----------
: : : :
: : : : Can the forum members guide me how to apply for AI certification , OUTSIDE USA.
: : : Contact John O'Brien at obirc@aol.com
: : : He holds very informative training courses on API 510, API 653 and API 570 outside the USA. He can tell you all you need to know.
: : Thank you for the information
: Actually, an ASME Authorized Inspector is different than an Inspector certified under API provisions.
: You would need to be in the employment of an ASME Authorized Inspection Agency or a Juridiction to be able to take the NAtional Board examination.
: Better to contact the National Board at 614-888-8320 and get clear information.
------------ End Original Message ------------


You do not need to be in the employ of anyone to take the National Board Commission test. I just took it and passed, and have no job right now. You have to be in the employ of an AIA to get a commission, but you have 3 years after passing the testto do that.


 
 Reply 
 
murugesan
murugesan
08:00 Aug-20-2012
Re: Authorized Inspector
In Reply to Omar Kiptui at 02:45 Jun-14-2005 .

Sir

I just read your forum message that you took AI exam without being employed by an AIA or jurisdiction.

Did you find it easier to get a job after securing passing grade in AI exam.

I am also planning to take up the AI exam, but i am not employed by AIA or jurisdiction.

Please provide your input about how to prepare for the exam.

 
 Reply 
 
Danfer De la Cruz
Engineering
Peru, Joined Jun 2009, 11

Danfer De la Cruz

Engineering
Peru,
Joined Jun 2009
11
17:59 Aug-20-2012
Re: Authorized Inspector
In Reply to murugesan at 08:00 Aug-20-2012 .

Dear Sir.

I´m AI-ASME, API510, API653 and CWI.
You shall be attending 15 days a course in columbus-ohio before of test.
You shall be studing ASME seccion VIII, IX, I, IV , V, B31.1 and National Board.
Good Luck

 
 Reply 
 

Product Spotlight

iProbe - USB Phased Array Probe

Turn your PC, Laptop or Tablet into a powerful 32:64 Phased Array system with our USB powered Phas
...
ed Array iProbe and inspection software package. Perform affordable weld inspection and corrosion mapping inspections with this powerful but small system. The probe has a 100V pulser, 8K PRF, dual axis encoder input and achieves outstanding signal quality.
>

AIS229 - Multipurpose Real Time System

Latest standard & automatic real time system developed by Balteau. The AIS229 has been designed to
...
do series inspection in a wide variety of industry. Composed of a shielded cabinet, 5 axis manipulator, x-ray generator and tubehead from 160kV to 225kV, a fl at panel & much more, the AIS229 is most certainly one of the most multipurpose RTR system available on the market.
>

Lyft™: Pulsed Eddy Current Reinvented

PEC Reinvented—CUI Programs Redefined Corrosion under insulation (CUI) is possibly the greatest u
...
nresolved asset integrity problem in the industry. Current methods for measuring wall thickness with liftoff, without removing insulation, all have severe limitations. Eddyfi introduces Lyft — a reinvented, high-performance pulsed eddy current (PEC) solution. The patent- pending system features a state-of-the-art portable instrument, real- time C-scan imaging, fast data acquisition with grid-mapping and dynamic scanning modes, and flexibility with long cables. It can also scan through thick metal and insulation, as well as aluminum, stainless steel, and galvanized steel weather jackets. Who else but Eddyfi to reinvent an eddy current technique and redefine CUI programs. Got Lyft?
>

NDT Master Lecturer

In the program both university professors and practitioners will give lectures, which guarantees the
...
oretical depth and practical inside. Academic Director: Prof. Dr. Christian Boller
The following lecturers are not complete: Prof. Tadeusz Stepinski, Prof. Wieslaw Staszewski, Prof. Frank Walther, Prof. Giovanni Bruno, Prof. Gerd Dobmann, Prof. Philippe Guy
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window