where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Hi-Spec Systems
we are specialised in the design, development and manufacture of Phased Array and Time-of-Flight Diffraction (ToFD) ultrasonic inspection systems.
927 views
Technical Discussions
Mahmoud Mhamed
Mahmoud Mhamed
07:32 May-10-2004
Measure Tensil test by NDT

I need a methode to determine the tensile stress of steel pipes by NDT I need a method to determine the tensile stress of in service steel pipes by NDT – I know that the hardness test can be use as indication but Are their any method more accurate


 
 Reply 
 
elgazery
Consultant
National Institute for Standards, Egypt, Joined May 2003, 10

elgazery

Consultant
National Institute for Standards,
Egypt,
Joined May 2003
10
00:13 May-18-2004
Re: Measure Tensil test by NDT
Dear mahmoud
are you mean tensile stress or tensile strength?
in the two cases the ultrasonic velocity measyrement is fast efficient NDT tool to do that.
best regards
Dr elgazery
For more details you can contact me
0105786015 (egypt) or elgazery_nis@hotmail.com


 
 Reply 
 
Joaquin Toba
Joaquin Toba
08:30 Aug-27-2004
Measure Tensil test for clips
I need a methode to determine the tensile stress of cilps.



 
 Reply 
 
alshaiye
alshaiye
06:30 Apr-20-2006
Re: Measure Tensil test for clips
----------- Start Original Message -----------
: I need a methode to determine the tensile stress of cilps...
------------ End Original Message ------------




 
 Reply 
 

Product Spotlight

Panther

M2M PANTHER is a phased-array equipment designed for both desktop and industrial applications, offer
...
ing unparalleled performance in a compact unit. It combines the speed required for industrial integrated Phased-Array Ultrasound (PAUT) solutions, with the most complete set of total focusing method (TFM) imaging techniques, making it the ultimate tool for R&D and procedure qualification.
>

SONOAIR - air-coupled Phased Array Ultrasonic Inspection System

For highly attenuating materials, the performance of the system is critical. The ultrasonic sensors,
...
the scanning area and the system settings should be flexibly adapted to the test task and the material. These high expectations are met with the new and modular testing system SONOAIR. With the world’s first air-coupled phased-array UT inspection system SONOAIR we developed a technology that works with up to 4 transmitter and receiver channels with freely configurable square wave burst transmitters as wells as low noise receiving amplifiers.
>

TraiNDE UT

TraiNDE UT is a virtual tool associated with a signal database which simulates real inspection con
...
ditions for numerous applications (Type A/V1 block, DAC block, welds and plates).
>

PROlineTOP Plug & Play Ultrasonic inspection device

As Plug & Play solution it units all control and operation elements in a small housing and therefo
...
re replaces the typical control cabinet...
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window