where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
1838 views
Technical Discussions
sreejith
India, Joined Jan 2015, 5

sreejith

India,
Joined Jan 2015
5
02:21 Mar-11-2017
PAUT in Inconel cladding

Hai Experts,
Is PAUT possible for the following joints..

1)Volumetric examination and bond line integrity check in cladded area.

cladded Pipe OD/Material=24"/ API 5L X65
Cladding material & thickness=Inconel 625 & 4.3 mm thickness.
Is there any special Probe like DMA or DLA required?

2)Volumetric Examination in butt joint/similar welds

Butt joint= similar welds ,single 'V' between cladded pipe and cladded hanger flange.

 
 Reply 
 
Aniss Ziani
, Advanced NDT inspector
ISQ, Algeria, Joined Nov 2014, 32

Aniss Ziani

, Advanced NDT inspector
ISQ,
Algeria,
Joined Nov 2014
32
15:12 Mar-11-2017
Re: PAUT in Inconel cladding
In Reply to sreejith at 02:21 Mar-11-2017 (Opening).

Hi Sreejith,
Have a look on this interesting article from Carlo Romito and Frederic Jacques :
https://www.linkedin.com/pulse/method-automatic-ultrasonic-testing-aut-corrosion-resistant-romito-1
Regards,
Aniss Ziani

 
 Reply 
 
Anmol Birring
Consultant,
Birring NDE Center, Inc., USA, Joined Aug 2011, 805

Anmol Birring

Consultant,
Birring NDE Center, Inc.,
USA,
Joined Aug 2011
805
22:24 Mar-11-2017
Re: PAUT in Inconel cladding
In Reply to sreejith at 02:21 Mar-11-2017 (Opening).

what is the weld material ?

 
 Reply 
 
sreejith
India, Joined Jan 2015, 5

sreejith

India,
Joined Jan 2015
5
02:24 Mar-13-2017
Re: PAUT in Inconel cladding
In Reply to Anmol Birring at 22:24 Mar-11-2017 .

SMAW,E7018

 
 Reply 
 
Anmol Birring
Consultant,
Birring NDE Center, Inc., USA, Joined Aug 2011, 805

Anmol Birring

Consultant,
Birring NDE Center, Inc.,
USA,
Joined Aug 2011
805
05:48 Mar-13-2017
Re: PAUT in Inconel cladding
In Reply to sreejith at 02:24 Mar-13-2017 .

So it is carbon steel weld with A625 clad overlay ?

 
 Reply 
 
sreejith
India, Joined Jan 2015, 5

sreejith

India,
Joined Jan 2015
5
07:26 Mar-14-2017
Re: PAUT in Inconel cladding
In Reply to Anmol Birring at 05:48 Mar-13-2017 .

yes

 
 Reply 
 
Anmol Birring
Consultant,
Birring NDE Center, Inc., USA, Joined Aug 2011, 805

Anmol Birring

Consultant,
Birring NDE Center, Inc.,
USA,
Joined Aug 2011
805
04:19 Mar-16-2017
Re: PAUT in Inconel cladding
In Reply to sreejith at 07:26 Mar-14-2017 .

If the weld is CS, you can use PAUT - shear wave but limited to the 1/2 vee mode. So that will mean removal of weld cap to get full weld coverage. And since it is CS you can add TOFD

 
 Reply 
 

Product Spotlight

Wireless TOFD scanner

Quick, accurate and highly reproducible welds testing. The System operates wirelessly and is compat
...
ible with any type of Windows based Laptop, Desktop or Tablet.
>

Ultrasonic Testing Immersion Tanks with Unmatched Scanning Features

TecScan’s non-destructive testing Ultrasonic Immersion Tanks & scanners are designed for high pe
...
rformance and demanding NDT testing applications. Our Scan3D™ line of High Precision Immersion Tanks are specifically designed for automated ultrasonic testing of complex composites parts used in aerospace and industrial applications.
>

TESTD-PT SYSTEM

Pulse thermography is a non-contact test method that is ideal for the characterization of thin fil
...
ms and coatings or the detection of defects. With a remarquable short test time and a high detection sensitivity, the Telops TESTD-PT is the perfect tool for non- destructive testing. With such high frame rates, it is even possible to investigate highly conductive or diffusive materials.
>

Cygnus 6+ PRO Multi-Mode Ultrasonic Thickness Gauge

The Cygnus 6+ PRO thickness gauge is the most advance gauge within the Cygnus range with key featu
...
res including: comprehensive data logging; A-scan and B-scan display; manual gain control; Bluetooth connectivity; and much more. With its unique dual display and three measuring modes (Multiple-Echo, Echo-Echo and Single-Echo), this surface thickness gauge offers maximum versatility for inspections.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window