where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

656 views
Job Offers
Pugal
Director,
CUTECH PROCESS SERVICES PTE LTD, SINGAPORE, Singapore, Joined Mar 2013, 56

Pugal

Director,
CUTECH PROCESS SERVICES PTE LTD, SINGAPORE,
Singapore,
Joined Mar 2013
56
01:58 May-24-2017
In-Situ Metallography Inspector / engineer

Posted by Cutech Process Services Pte Ltd, Singapore
Job Location: Singapore

Hi,

We are looking for In-Situ Metallography (REPLICAS) Professional with good communication skill for the
Insitu metallography Inspector / Engineer position.

Requirements:

Diploma or Degree in metallurgy or Equivalent
Preferably having NDT Level II certs (RT,UT,MT,PT) and having NDT hands on experience
communication skill
Minimum 2 - 4 years experience in In-Situ Metallography for various plant damage mechanisms
Able to perform In-situ (Replica)Metallography at various site and prepare final reports.

Interested personnel can send the CV and other certificates of the personnel to
the following email ID : pugal@cutechgroup.com and CC to arasu@cutechgroup.com; ksmohan@cutechgroup.com

 
 

Product Spotlight

A1525 SOLO

A1525 Solo – the most compact and affordable TMF unit with two phased array transducers and 3D v
...
isualization and analysis software in standard delivery set. A compact, ergonomic and easy to handheld Phased Array unit based on Total Focusing Method for easy-going imaging of inspection objects with two-dimensional and three-dimensional visualization and evaluation of inspection results.
>

FD800 Bench Top Flaw Detectors

The bench-top FD800 flaw detector range combines state-of-the-art flaw detection with advanced mater
...
ial thickness capabilities. Designed for use in the laboratory these gauges are the tool you need for all your flaw detecting needs.
>

TraiNDE UT

TraiNDE UT is a virtual tool associated with a signal database which simulates real inspection con
...
ditions for numerous applications (Type A/V1 block, DAC block, welds and plates).
>

OmniScan™ X3 flaw detector

The OmniScan X3 flaw detector is a complete phased array toolbox. Powerful tools, like total focus
...
ing method (TFM) images and advanced visualization capabilities, enable you to complete your inspection with greater confidence.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window