where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Hillger NDT GmbH
was founded in 1984 and develops special ultrasonic imaging systems for high-tech materials.
506 views
Career Discussions
JOHNRODRIG
Other, Manager
Portugal, Joined Sep 2015, 3

JOHNRODRIG

Other, Manager
Portugal,
Joined Sep 2015
3
18:17 Jun-23-2017
Thickness of Nickel Plating on UT Reference / Calibration Blocks

Dear Professionals,
Greetings,

Appreciate if anyone could let me know the thickness of nickel plating on UT reference / calibration blocks e.g. IIW Type I block.

Thanks

 
 Reply 
 
Phil Herman
Sales, - Manufacture of NDT Reference Standards/Test Blocks
PH Tool Reference Standards, USA, Joined Oct 1999, 79

Phil Herman

Sales, - Manufacture of NDT Reference Standards/Test Blocks
PH Tool Reference Standards,
USA,
Joined Oct 1999
79
19:37 Jun-23-2017
Re: Thickness of Nickel Plating on UT Reference / Calibration Blocks
In Reply to JOHNRODRIG at 18:17 Jun-23-2017 (Opening).

Hello John,
PH Tool manufactures ultrasonic test blocks such as the IIW and hundreds of others. The company designed and installed an Electroless Nickel Plating line in 2015 for coating steel blocks with a very thin protective layer of pure nickel. The plating thickness is 0.0002 to 0.0003 inch per surface (5 to 7 microns).
Phil Herman
President/CEO
PH Tool Reference Standards
www.phtool.com

 
 Reply 
 
JOHNRODRIG
Other, Manager
Portugal, Joined Sep 2015, 3

JOHNRODRIG

Other, Manager
Portugal,
Joined Sep 2015
3
03:48 Jun-24-2017
Re: Thickness of Nickel Plating on UT Reference / Calibration Blocks
In Reply to Phil Herman at 19:37 Jun-23-2017 .

Dear Phil,
Thanks a lot for our quick reply.

 
 Reply 
 

Product Spotlight

GEKKO, Standard and Advanced phased-array for Easier inspection

M2M Gekko® is a field-proven flaw detector offering PAUT, UT, TOFD and TFM through the streamline
...
d user interface Capture™. Released in 32:128, 64:64 or 64:128 channel configurations, Gekko combines high- resolution and speed while reducing inspectors’ training time.
>

Eddy Current inspection : RotoETscan Rotating Head

The rotating head RotoETscan detects the presence of longitudinal surface or sub surface defects a
...
t high speed. The rotating head is often installed directly on the production line. It is generally dedicated to the control of long products such as tubes, bars and wires, made of ferrous or non-ferrous material. It can also be used for inspection of small parts (billets).
>

Sci Aps Z-Series Portable Handheld Analysers

The world’s only handheld analyzer that measures carbon content in stainless (yes even L-grades),s
...
teels, and cast irons. Also accepted for low Si analysis for sulfidic corrosion analysis, and is widely used in the power industry for Cr analysis, for flow accelerated corrosion applications.
>

Ultrasonic Testing Immersion Tanks with Unmatched Scanning Features

TecScan’s non-destructive testing Ultrasonic Immersion Tanks & scanners are designed for high pe
...
rformance and demanding NDT testing applications. Our Scan3D™ line of High Precision Immersion Tanks are specifically designed for automated ultrasonic testing of complex composites parts used in aerospace and industrial applications.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window