where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
523 views
Technical Discussions
Mohamed karim
Egypt, Joined Mar 2012, 12

Mohamed karim

Egypt,
Joined Mar 2012
12
06:57 Sep-21-2017
Toe crack manufacturing

Hello experts

I would like to have your pieces of advices for reliable and repeatable methodology to create toe crack within the carbon steel welded joints.

 
 Reply 
 
Louis
Other,
Eddyfi Technologies, Canada, Joined May 2013, 33

Louis

Other,
Eddyfi Technologies,
Canada,
Joined May 2013
33
17:20 Sep-21-2017
Re: Toe crack manufacturing
In Reply to Mohamed karim at 06:57 Sep-21-2017 (Opening).

Hello,
The only advice I personally can give is to contact Flawtech.
I'm sure they will be happy to manufacture what you need: http://flawtech.com/
They have done amazing work over the last 30+ years in the NDT industry.
All the best, Louis

1
 
 Reply 
 
Paul Holloway
Consultant,
Holloway NDT & Engineering Inc , Canada, Joined Apr 2010, 227

Paul Holloway

Consultant,
Holloway NDT & Engineering Inc ,
Canada,
Joined Apr 2010
227
23:37 Sep-24-2017
Re: Toe crack manufacturing
In Reply to Mohamed karim at 06:57 Sep-21-2017 (Opening).

See this publication:

GUIDEBOOK FOR THE FABRICATION OF NON-DESTRUCTIVE TESTING (NDT) TEST SPECIMENS
IAEA, VIENNA, 2001
IAEA-TECDOC-TCS-13
ISSN 1011–4289
© IAEA, 2001
Printed by the IAEA in Austria
June 2001

1
 
 Reply 
 

Product Spotlight

HARDNESS TESTER TKM-459CE combi

TKM-459CE combi applies 2 methods of hardness control: UCI and Leeb. It provides high-accuracy tes
...
ting of metals and alloys as well as items of different sizes and configurations, their hardened layers and galvanic coatings. Device represents results in HB, HRC, HV and others. Shock-, dust- and water-proof housing with intuitive software make this gauge easy to use in all working conditions.
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

Compact NDT inspection-heads for measurements with active thermography

The compact inspection head is suitable for thermographic ndt tasks. The uncooled infrared camera
...
is specially developed for NDI-tasks and offers a thermal sensitivity until now known only from thermal imagers with cooled detector. All required components and functions are integrated into the inspection-head. You will only need an ethernet cable to connect the sensor with the evaluation system.
>

NovaScope 6000

The all-digital Novascope 6000 is a portable, ultra-high precision thickness gauge for high-speed
...
thickness measurement. Novascope 6000 has unmatched capabilities and unique features including: •Superior Resolution with high contrast, high-speed color RF display •High pulser voltage •Real-time video output •Increased internal/external data storage •Programmable SetUp features •Battery & AC Powered
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window