where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

DASEL SISTEMAS
Our Phased Array equipments, based on SITAU Technology, are among the PAS highest performance in the market.

465 views
Technical Discussions
Mohamed karim
Egypt, Joined Mar 2012, 12

Mohamed karim

Egypt,
Joined Mar 2012
12
06:57 Sep-21-2017
Toe crack manufacturing

Hello experts

I would like to have your pieces of advices for reliable and repeatable methodology to create toe crack within the carbon steel welded joints.

    
 
 
Louis
Other,
Eddyfi, Canada, Joined May 2013, 31

Louis

Other,
Eddyfi,
Canada,
Joined May 2013
31
17:20 Sep-21-2017
Re: Toe crack manufacturing
In Reply to Mohamed karim at 06:57 Sep-21-2017 (Opening).

Hello,
The only advice I personally can give is to contact Flawtech.
I'm sure they will be happy to manufacture what you need: http://flawtech.com/
They have done amazing work over the last 30+ years in the NDT industry.
All the best, Louis

1    
 
 
Paul Holloway
Consultant, UT Level 3
Holloway NDT & Engineering Inc , Canada, Joined Apr 2010, 171

Paul Holloway

Consultant, UT Level 3
Holloway NDT & Engineering Inc ,
Canada,
Joined Apr 2010
171
23:37 Sep-24-2017
Re: Toe crack manufacturing
In Reply to Mohamed karim at 06:57 Sep-21-2017 (Opening).

See this publication:

GUIDEBOOK FOR THE FABRICATION OF NON-DESTRUCTIVE TESTING (NDT) TEST SPECIMENS
IAEA, VIENNA, 2001
IAEA-TECDOC-TCS-13
ISSN 1011–4289
© IAEA, 2001
Printed by the IAEA in Austria
June 2001

1    
 
 

Product Spotlight

NDTkit RT

NDTkit RT, TESTIA's Digital Radiography software The NDTkit product line software for X-ray analysi
...
s. NDTkit RT is a software benefiting from the Ultis kernel which is dedicated to radiographic image analysis. It offers a set of tools and filtering processes to assist RT operators in finding relevant flaws.
>

Semi-Automated Phased Array Immersion System for Small Composite Parts

Turn-key semi-automated system as an improved and affordable solution for inspection of small comp
...
osite parts. Includes support table, immersion tank, scanner, PA instrument, PC, Analysis software, database, wedge management and other options.
>

Ultrasonic tomograph for imaging of concrete structures А1040 MIRA

Applicable for concrete inspection allowing imaging of the internal structure of objects from conc
...
rete, reinforced concrete, different stones. The operation applies pulse-echo technique at one-side access to the object. The instrument is feasible for concrete inspection for searching conduct ducts, conduits, detection of foreign inclusions, holes, honeycombing, cracks and other concrete defects.
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window