where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Volume Graphics GmbH
By choosing Volume Graphics software, you can rely on more than 20 years of experience in the development of software for non-destructive testi ...
684 views
Technical Discussions
Nimesh Acharya
Nimesh Acharya
10:03 Feb-16-2018
Surface Eddy Current Testing using Olympus MS5800

is it possible to do surface eddy current testing using Olympus MS5800?

Regards
Nimesh

 
 Reply 
 
Ezequiel
NDT Inspector,
Argentina, Joined Apr 2016, 23

Ezequiel

NDT Inspector,
Argentina,
Joined Apr 2016
23
12:58 Feb-16-2018
Re: Surface Eddy Current Testing using Olympus MS5800
In Reply to Nimesh Acharya at 10:03 Feb-16-2018 (Opening).

Dear Nimesh, yes! It si possible. You need a surface probe.

 
 Reply 
 
P V SASTRY
R & D, NDT tecniques metallurgy
TAKEN VRS FROM THE POSITION OF SR. DEPUTY GENERAL MANAGER BHEL CORPORATE R&D, India, Joined Jan 2003, 195

P V SASTRY

R & D, NDT tecniques metallurgy
TAKEN VRS FROM THE POSITION OF SR. DEPUTY GENERAL MANAGER BHEL CORPORATE R&D,
India,
Joined Jan 2003
195
18:34 Feb-16-2018
Re: Surface Eddy Current Testing using Olympus MS5800
In Reply to Nimesh Acharya at 10:03 Feb-16-2018 (Opening).

Yes you can very well use it. You need to use different probes for surface testing

P V SASTRY

 
 Reply 
 
Anmol Birring
Consultant,
Birring NDE Center, Inc., USA, Joined Aug 2011, 776

Anmol Birring

Consultant,
Birring NDE Center, Inc.,
USA,
Joined Aug 2011
776
04:38 Feb-17-2018
Re: Surface Eddy Current Testing using Olympus MS5800
In Reply to Nimesh Acharya at 10:03 Feb-16-2018 (Opening).

MS 5800 is a overkill for surface inspection .
While it can be used, the machine is designed for multi frequency ECT of tubing.
Surface inspection is done using simpler portable machines.

 
 Reply 
 

Product Spotlight

Silverwing RMS PA - Phased-array corrosion mapping

Eddyfi Technologies integrated two market leading solutions, Silverwing’s RMS and M2M’s instru
...
ments to provide a high-speed, remote access ultrasonic phased-array inspection system with live total focusing method (TFM).
>

Echomac® Small

Available with up to eight channels of electronics to detect and evaluate thickness, flaws and eccen
...
tricity, this UT tester is housed in a convenient, smaller cabinet. This instrument can be used in conjunction with bubbler or immersion tank systems, or with a test bench or in laboratory applications. The Echomac® Small is available in the FD4, FD6 or FD6A versions.
>

Conformable wedge transducer

The conformability is obtained with a flexible membrane filled with water between the transducer and
...
the inspected component. The coupling between the membrane and the component requires a small quantity of water or couplant. The conformable wedge combines the acoustic performance of immersion technique with good coupling and low attenuation.
>

OmniScan™ X3 flaw detector

The OmniScan X3 flaw detector is a complete phased array toolbox. Powerful tools, like total focus
...
ing method (TFM) images and advanced visualization capabilities, enable you to complete your inspection with greater confidence.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window