where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
735 views
Technical Discussions
Phil Herman Jr.
Sales, - Manufacture of NDT Reference Standards/Test Blocks
PH Tool Reference Standards, USA, Joined Oct 1999, 79

Phil Herman Jr.

Sales, - Manufacture of NDT Reference Standards/Test Blocks
PH Tool Reference Standards,
USA,
Joined Oct 1999
79
01:15 Jan-12-2001
Fokker F-27 Calibration Plate S0094

PH Tool Reference Standards has been requested to manufacture Calibration Plate S0094 from the Fokker F-27 NDI Manual 57-40-01 Part 4, Feb 01, 1990, figure 3. The standard is a multil-layer bolthole type containing EDM notches. The material designated is "Plate Material 5.324 and 5.322." Does anyone know a U.S. equivalent for this material? A material specification or UNS # would be very helpful.

Thanks in advance.
Phil Herman Jr.
http://www.phtool.com




 
 Reply 
 
Robert Miskimen
Robert Miskimen
14:41 Mar-23-2018
Re: Fokker F-27 Calibration Plate S0094
In Reply to Phil Herman Jr. at 01:15 Jan-12-2001 (Opening).

5.322 Aluminum is equivalent to 2024 Clad (T3 or T6)
5.324 Aluminum is equivalent to 7075 T6

These designations are from the European Aerospace industries (Fokker, Airbus, etc)

 
 Reply 
 
Joe Buckley
Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT, United Kingdom, Joined Oct 1999, 526

Joe Buckley

Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT,
United Kingdom,
Joined Oct 1999
526
15:05 Mar-23-2018
Re: Fokker F-27 Calibration Plate S0094
In Reply to Robert Miskimen at 14:41 Mar-23-2018 .

Thats the great thing about this Forum, you always get an answer if you are patient enough...

1
 
 Reply 
 
phil herman
Sales, - Manufacture of NDT Reference Standards/Test Blocks
PH Tool Reference Standards, USA, Joined Oct 1999, 79

phil herman

Sales, - Manufacture of NDT Reference Standards/Test Blocks
PH Tool Reference Standards,
USA,
Joined Oct 1999
79
15:36 Mar-23-2018
Re: Fokker F-27 Calibration Plate S0094
In Reply to Joe Buckley at 15:05 Mar-23-2018 .

You are right, Joe. Some answers are just quicker than others. I hope my customer from 2001 hasn't lost interest! ;)
Thanks Robert for providing the useful answer as I am sure someone else will need to know this down the road.

1
 
 Reply 
 

Product Spotlight

TESTD-PT SYSTEM

Pulse thermography is a non-contact test method that is ideal for the characterization of thin fil
...
ms and coatings or the detection of defects. With a remarquable short test time and a high detection sensitivity, the Telops TESTD-PT is the perfect tool for non- destructive testing. With such high frame rates, it is even possible to investigate highly conductive or diffusive materials.
>

Navic - Steerable Modular Automated Scanner

The Navic is a modular, motorized, steerable scanner designed to carry multiple attachments used
...
in various scanning and inspection applications. The Navic is capable of weld scanning (girth welds and long seam welds), automated corrosion mapping, and tank scanning.
>

Compact NDT inspection-heads for measurements with active thermography

The compact inspection head is suitable for thermographic ndt tasks. The uncooled infrared camera
...
is specially developed for NDI-tasks and offers a thermal sensitivity until now known only from thermal imagers with cooled detector. All required components and functions are integrated into the inspection-head. You will only need an ethernet cable to connect the sensor with the evaluation system.
>

High-end Ultrasonic Flaw Detector with 32:128PR PAUT and 2-ch TOFD: SyncScan 2

SIUI’s newly launched SyncScan 2, is a high-end ultrasonic flaw detector with 32:128PR PAUT and
...
2-ch TOFD, which can maximize your efficiency for PA and TOFD. ● Support PA/TOFD/UT ● 32-ch PA is more suitable for inspection on extra-thick wall and high-attenuation material. ● 32-ch PA and 2-ch TOFD work simultaneously. ● Support PR mode for corrosion inspection.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window