where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

769 views
Technical Discussions
Arun kumar
Arun kumar
06:31 Nov-30-2018
Penetrant test chemicals - reg

Please suggest a good brand for PT testing chemicals other than magnaflux

 
 Reply 
 
Rishikesh Kumar
Rishikesh Kumar
10:04 Nov-30-2018
Re: Penetrant test chemicals - reg
In Reply to Arun kumar at 06:31 Nov-30-2018 (Opening).

some good brands are: P-MET, MR Chemie, etc.

 
 Reply 
 
William A Jensen
Other,
IHI Southwest Technologies, Inc., USA, Joined May 2017, 67

William A Jensen

Other,
IHI Southwest Technologies, Inc.,
USA,
Joined May 2017
67
14:19 Nov-30-2018
Re: Penetrant test chemicals - reg
In Reply to Rishikesh Kumar at 10:04 Nov-30-2018 .

Met-L-Chek

 
 Reply 
 
Manuel Haces
Director, - Wire rope inspection
Haces Inspección del Noreste and Wire Rope Inspection, Mexico, Joined Jun 2002, 125

Manuel Haces

Director, - Wire rope inspection
Haces Inspección del Noreste and Wire Rope Inspection,
Mexico,
Joined Jun 2002
125
21:06 Nov-30-2018
Re: Penetrant test chemicals - reg
In Reply to Arun kumar at 06:31 Nov-30-2018 (Opening).

Sherwin, etc. Look for conformance to ASTM

 
 Reply 
 
Juan Lonergan
NDT Inspector, QA/NDT Responsible L3
USA, Joined Dec 2018, 4

Juan Lonergan

NDT Inspector, QA/NDT Responsible L3
USA,
Joined Dec 2018
4
21:33 Dec-04-2018
Re: Penetrant test chemicals - reg
In Reply to Arun kumar at 06:31 Nov-30-2018 (Opening).

Chemetall

 
 Reply 
 
Carlos
NDT Inspector,
UIS - Universidad Industrial de Santander, Colombia, Joined Oct 2014, 33

Carlos

NDT Inspector,
UIS - Universidad Industrial de Santander,
Colombia,
Joined Oct 2014
33
15:37 Dec-13-2018
Re: Penetrant test chemicals - reg
In Reply to Arun kumar at 06:31 Nov-30-2018 (Opening).

Met-L-Chek

 
 Reply 
 
Peter
Consultant, ASNT MT/PT Level 3, Quality Manager
SharingNDT, USA, Joined Jan 2017, 80

Peter

Consultant, ASNT MT/PT Level 3, Quality Manager
SharingNDT,
USA,
Joined Jan 2017
80
23:34 Dec-27-2018
Re: Penetrant test chemicals - reg
In Reply to Arun kumar at 06:31 Nov-30-2018 (Opening).

It depends on your requirements. Are you working to an aerospace, military, or welding specification? For example, ASTM, AMS, and most MIL-STD specifications state that you can only used QPL-AMS-2644 approved materials.

If that's the case, you can use any QPL approved materials such as Met-L-Chek, which is the most affordable QPL approved material on the market. Then Sherwin, Chemetall (Ardrox), etc.

 
 Reply 
 
Sunder Yadav
,
India, Joined Mar 2018, 1

Sunder Yadav

,
India,
Joined Mar 2018
1
17:29 Dec-31-2018
Re: Penetrant test chemicals - reg
In Reply to Arun kumar at 06:31 Nov-30-2018 (Opening).

MR Chemie is a good brand for dpt test.

 
 Reply 
 

Product Spotlight

Ultrasonic Squirter/Gantry System

TecScan’s NDT Ultrasonic Gantry Systems are industrial Squirter scanners designed for non-destru
...
ctive quality testing and raster scanning of large structures and parts. The Gantry Systems are usually composed of an Industrial Mechanical Scanner and a Control Room with System Workstation.
>

UCI Hardness Tester NOVOTEST T-U2

UCI hardness tester NOVOTEST T-U2 is is used for non-destructive hardness testing of: metals and
...
alloys by scales of hardness: Rockwell (HRC), Brinell (HB), Vickers (HV); non-ferrous metals, alloys of iron etc., and using five additional scales for calibration; with tensile strength (Rm) scale determines the tensile strength of carbon steel pearlitic products by automatic recalculation from Brinell (HB) hardness scale.
>

Immersion systems

ScanMaster ultrasonic immersion systems are designed for high throughput, multi shift operation in a
...
n industrial or lab environment. These fully integrated systems provide various scanning configurations and incorporate conventional and phased arrays technologies to support diverse applications, such as inspection of disks, bars, shafts, billets and plates. All of ScanMaster immersion systems are built from high accuracy scanning frames allowing for scanning of complex parts and include a multi-channel ultrasonic instrument with exceptional performance. The systems are approved by all major manufacturers for C-scan inspection of jet engine forged discs. Together with a comprehensive set of software modules these flexible series of systems provide the customer with the best price performance solutions.
>

MANTIS

MANTIS is a compact, powerful and affordable flaw detector (16:64PR), dedicated to field operators
...
. This portable equipment offers standard (electronic-, sector-, compound scan, conventional UT for pulse-echo, dual array and TOFD inspections), and advanced phased-array (real-time TFM -Total Focusing Method). MANTIS benefits from the same intuitive and user-friendly interface (CAPTURE) than Gekko for easier inspections.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window