where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

109 views
Technical Discussions
Ger Carolan
Engineering,
Terma Aerostructures Manufacturing, Denmark, Joined Mar 2016, 2

Ger Carolan

Engineering,
Terma Aerostructures Manufacturing,
Denmark,
Joined Mar 2016
2
08:59 Dec-10-2018
Combined UV-a/luxmeter

Hello all, would appreciate if anyone can recommend a combined UV-A/luxmeter that is reliable and robust. We do penetrant line inspection to ASTM E1417, measuring LED UV-A per ASTM E3022. Kind regards, Ger.

    
 
 
Juan Lonergan
NDT Inspector, QA/NDT Responsible L3
USA, Joined Dec 2018, 4

Juan Lonergan

NDT Inspector, QA/NDT Responsible L3
USA,
Joined Dec 2018
4
16:06 Dec-10-2018
Re: Combined UV-a/luxmeter
In Reply to Ger Carolan at 08:59 Dec-10-2018 (Opening).

Hello ger,

The Labino meter works great, the only issue is that you need to send it out to calibration as this meter use a software for calibration, it is wireless and you get both intensities at the same time on the same sensor, the DLM-1000 from Gould-Bass is also good but you need to replace the sensor to get the intensities.
here is the links for the MFG.

https://labino.com/product/apollo-1-0/

http://gould-bass.net/digital-radiometer-dlm-1000

    
 
 
Neil Burleigh
Sales
Krautkramer Australia Pty Ltd, Australia, Joined Dec 2002, 153

Neil Burleigh

Sales
Krautkramer Australia Pty Ltd,
Australia,
Joined Dec 2002
153
22:53 Dec-10-2018
Re: Combined UV-a/luxmeter
In Reply to Ger Carolan at 08:59 Dec-10-2018 (Opening).

Hi Ger,
have a look at the Baugh and Weedon LumaCheck.

http://bw-nde.com/products-by-method/mpi/lumacheck

regards
Neil Burleigh

    
 
 

Product Spotlight

Teletest Focus+

Teletest Focus+ electronics have superior capabilities than rivals on the market. Beyond the usual
...
test features, Focus+ has 24 transmit channels and 24 receive channels, with an additional on-board switching capabilities. The instrument's frequency range is 10–300 kHz.
>

Conformable wedge transducer

The conformability is obtained with a flexible membrane filled with water between the transducer and
...
the inspected component. The coupling between the membrane and the component requires a small quantity of water or couplant. The conformable wedge combines the acoustic performance of immersion technique with good coupling and low attenuation.
>

High-end Ultrasonic Flaw Detector with 32:128PR PAUT and 2-ch TOFD: SyncScan 2

SIUI’s newly launched SyncScan 2, is a high-end ultrasonic flaw detector with 32:128PR PAUT and
...
2-ch TOFD, which can maximize your efficiency for PA and TOFD. ● Support PA/TOFD/UT ● 32-ch PA is more suitable for inspection on extra-thick wall and high-attenuation material. ● 32-ch PA and 2-ch TOFD work simultaneously. ● Support PR mode for corrosion inspection.
>

Immersion systems

ScanMaster ultrasonic immersion systems are designed for high throughput, multi shift operation in a
...
n industrial or lab environment. These fully integrated systems provide various scanning configurations and incorporate conventional and phased arrays technologies to support diverse applications, such as inspection of disks, bars, shafts, billets and plates. All of ScanMaster immersion systems are built from high accuracy scanning frames allowing for scanning of complex parts and include a multi-channel ultrasonic instrument with exceptional performance. The systems are approved by all major manufacturers for C-scan inspection of jet engine forged discs. Together with a comprehensive set of software modules these flexible series of systems provide the customer with the best price performance solutions.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window