where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Zawada NDT
Suppliers of instruments to test steel wire ropes in-situ, using magnetic, non-destructive method.
437 views
Technical Discussions
Chandrasekhar
Welspun Corp, pipe manufacturing , India, Joined Mar 2019, 2

Chandrasekhar

Welspun Corp, pipe manufacturing ,
India,
Joined Mar 2019
2
04:16 Mar-10-2019
How to calculate the penetrating power of ultrasonic waves both longitudinal and share waves

I am rising a question that, how can we calculate the penetrating power of the ultrasonic waves going the V1 block, I has seen a theory regarding to this but there was no mathematical expression to this,

The thing what I read was, we have to fix the probe on the perspex in the V1 block and make it to Max. Amplitude and take the amplitude value next in the same position we have to take the total number of echos and the amplitude of the last echo.

So, my doubt is by this how we can Caliculate the penetrating power.

Waiting for the answer
rudrachandrasekhar316@gmail.com
+91 9133769200 (whatsapp)

 
 Reply 
 
Arman
Engineering,
Turkey, Joined Oct 2014, 42

Arman

Engineering,
Turkey,
Joined Oct 2014
42
07:30 Mar-11-2019
Re: How to calculate the penetrating power of ultrasonic waves both longitudinal and share waves
In Reply to Chandrasekhar at 04:16 Mar-10-2019 (Opening).

Chandrasekhar,

My question is why you want to calculate penetration power?
Do you intend to know maximum effective range of inspection? Usually what is important for an inspector is how far UT wave can penetrate and detect a reflector with a specific size and orientation with respect to beam angle, not penetration power.

Regards,
Arman

 
 Reply 
 

Product Spotlight

Research and Application Development For NDT

Acuren’s Research and Application Development specializes in the development of advanced ultraso
...
nic inspection techniques and systems for challenging inspection applications, with an emphasis on practical solutions which are field deployable. Services include manual and automated ultrasonic inspection system development, inspection technique optimization using laboratory scale studies and ultrasonic modeling (CIVA, BeamTool), preparing technical justification for technique evaluation and qualification (Probability of Detection and sizing accuracy studies), inspection/calibration/analysis procedure preparation to support field deployment of custom techniques, and development of custom imaging algorithms to support challenging inspection applications.
>

GUL Subsea Solutions - Screeening & Monitoring

To inspect new and existing subsea lines, you need proven technology and experience. GUL offers it's
...
technology to solve this challenge: GUL Subsea and gMAT Transducer Rings.
>

iProbe - USB Phased Array Probe

Turn your PC, Laptop or Tablet into a powerful 32:64 Phased Array system with our USB powered Phas
...
ed Array iProbe and inspection software package. Perform affordable weld inspection and corrosion mapping inspections with this powerful but small system. The probe has a 100V pulser, 8K PRF, dual axis encoder input and achieves outstanding signal quality.
>

Ultrasonic Squirter/Gantry System

TecScan’s NDT Ultrasonic Gantry Systems are industrial Squirter scanners designed for non-destru
...
ctive quality testing and raster scanning of large structures and parts. The Gantry Systems are usually composed of an Industrial Mechanical Scanner and a Control Room with System Workstation.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window