where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

462 views
Technical Discussions
Raphaël MICHEL
R & D,
Vallourec, France, Joined Feb 2016, 9

Raphaël MICHEL

R & D,
Vallourec,
France,
Joined Feb 2016
9
14:02 Mar-13-2019
End of pipe inspection by UT

Dear NDT user,

Do you know any UT system dedicated to end of pipe inspection ?
My objectives is to provide Lg/Tr/WT/Lam on the last 200mm with minimum remaining untested end.

Best regards

Raphaël MICHEL

 
 Reply 
 
Nick Bublitz
Other,
VeriPhase, USA, Joined May 2010, 137

Nick Bublitz

Other,
VeriPhase,
USA,
Joined May 2010
137
18:11 Mar-13-2019
Re: End of pipe inspection by UT
In Reply to Raphaël MICHEL at 14:02 Mar-13-2019 (Opening).

Raphael,

check the link below. I no longer work for them so best to contact them directly for details.

https://www.olympus-ims.com/en/detecting-defects-in-the-ends-of-pipes-up-to-5-millimeters-0-2-inches-from-the-edge/


 
 Reply 
 
Volkan Eritmen
Sales,
Innerspec Technologies, Spain, Joined Jan 2019, 5

Volkan Eritmen

Sales,
Innerspec Technologies,
Spain,
Joined Jan 2019
5
16:23 Mar-18-2019
Re: End of pipe inspection by UT
In Reply to Raphaël MICHEL at 14:02 Mar-13-2019 (Opening).

Dear Raphaël,

Depending on the details of your project we, Innerspec Technologies, might have a solution for inspecting the en of pipes.

Please do not hesitate to contact me if you would like to talk about it.

veritmen@innerspec.com

 
 Reply 
 
Chris Forryan
Engineering, Ultrasonic NDT systems engineer
Ultrasonic NDT, United Kingdom, Joined Oct 2011, 11

Chris Forryan

Engineering, Ultrasonic NDT systems engineer
Ultrasonic NDT,
United Kingdom,
Joined Oct 2011
11
17:26 May-13-2019
Re: End of pipe inspection by UT
In Reply to Raphaël MICHEL at 14:02 Mar-13-2019 (Opening).

Dear Raphaël,

Unicorn Automation (N.D.T) Ltd will be able to quote you for an automated ultrasonic end tester. I have sent you an email.

Kind Regards,

Chris Forryan
Manager NDT Systems/Projects/Sales
Unicorn Automation (NDT) Ltd
cforryan@unicorn-automation.co.uk
www.unicorn-automation.co.uk

 
 Reply 
 

Product Spotlight

HARDNESS TESTER TKM-459CE combi

TKM-459CE combi applies 2 methods of hardness control: UCI and Leeb. It provides high-accuracy tes
...
ting of metals and alloys as well as items of different sizes and configurations, their hardened layers and galvanic coatings. Device represents results in HB, HRC, HV and others. Shock-, dust- and water-proof housing with intuitive software make this gauge easy to use in all working conditions.
>

Eddy Current inspection : RotoETscan Rotating Head

The rotating head RotoETscan detects the presence of longitudinal surface or sub surface defects a
...
t high speed. The rotating head is often installed directly on the production line. It is generally dedicated to the control of long products such as tubes, bars and wires, made of ferrous or non-ferrous material. It can also be used for inspection of small parts (billets).
>

NDT Master Lecturer

In the program both university professors and practitioners will give lectures, which guarantees the
...
oretical depth and practical inside. Academic Director: Prof. Dr. Christian Boller
The following lecturers are not complete: Prof. Tadeusz Stepinski, Prof. Wieslaw Staszewski, Prof. Frank Walther, Prof. Giovanni Bruno, Prof. Gerd Dobmann, Prof. Philippe Guy
>

Customized Probes and Transducers

With a strong development department and our own piezocomposite production, we accompany you from th
...
e first product idea to serial production. Our scientists are continuously researching new methods in the field of ultrasonic measurement technology. The progress achieved enables us to offer you optimal solutions.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window