where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
222 views
Technical Discussions
Andrei
NDT Inspector,
Philippines, Joined May 2015, 5

Andrei

NDT Inspector,
Philippines,
Joined May 2015
5
05:28 Mar-25-2019
CALIBRATION OF FBH USING DGS ON OLYMPUS MX2

Hi guys! I would like to ask how to calibrate the sizing using DGS with FBH with different sizes using the Olympus MX2? Thanks

 
 Reply 
 
matthias
NDT Inspector, CEO
Dreifeld Materialprüftechnik, Germany, Joined Sep 2005, 101

matthias

NDT Inspector, CEO
Dreifeld Materialprüftechnik,
Germany,
Joined Sep 2005
101
08:46 Mar-26-2019
Re: CALIBRATION OF FBH USING DGS ON OLYMPUS MX2
In Reply to Andrei at 05:28 Mar-25-2019 (Opening).

Not to be that guy, but this is very well documented in the manual along with other secrets ;)

 
 Reply 
 

Product Spotlight

YXLON Cougar EVO

Scalable small footprint X-ray inspection systems for assembly and laboratory applications. The
...
YXLON Cougar EVO series was designed to provide the "best-in- class" inspection solutions for SMT, semiconductor, and laboratory assembly applications, while maintaining a small system footprint for maximum convenience. With optimized software and hardware, these systems produce higher quality and more consistent results than other electronics inspection systems currently on the market.
>

Conformable wedge transducer

The conformability is obtained with a flexible membrane filled with water between the transducer and
...
the inspected component. The coupling between the membrane and the component requires a small quantity of water or couplant. The conformable wedge combines the acoustic performance of immersion technique with good coupling and low attenuation.
>

MUSE Mobile Ultrasonic Equipment

The MUSE, a portable ultrasonic imaging system, was developed for in-field inspections of light-weig
...
ht structures. The MUSE consists of a motor-driven manipulator, a water circulation system for the acoustic coupling and a portable ultrasonic flaw detector (USPC 3010). The MUSE provides images of internal defects (A-, B-,C- and D-scan).
>

TESTD-PT SYSTEM

Pulse thermography is a non-contact test method that is ideal for the characterization of thin fil
...
ms and coatings or the detection of defects. With a remarquable short test time and a high detection sensitivity, the Telops TESTD-PT is the perfect tool for non- destructive testing. With such high frame rates, it is even possible to investigate highly conductive or diffusive materials.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window