where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
434 views
Job Offers
vibrant
India, Joined Dec 2017, 12

vibrant

India,
Joined Dec 2017
12
10:29 May-09-2019
TRAINING FACULTY REQUIRED for ASNT LEVEL-II or ISO 9712 or PCN

Posted by vibrantndt
Job Location: chennai


TRAINING FACULTY REQUIRED for ASNT LEVEL-II or ISO 9712 or PCN
Job Location: CHENNAI
offered by :Vibrant ndt services pvt ltd

Dear Candidate,

Greetings,

We have an urgent requirement for NDT & QA/QC Training Faculty.
Qualification: Diploma and B.E/B.Tech Mechanical Only.

Certifications: ASNT LEVEL-II or ISO 9712 or PCN .

Experience: Minimum 1 Years in India.

Salary : As per Market Price / Based on Interview Performance.

Interview mode: Personal F2F Interview and Board Presentation.

No.of Opening : 2No's

Job Type: Permanent Role

Immediate Joiners and local (TAMILNADU) Candidates are Prepared.

Job Location: Chennai

Interview date: Walk-in Interview on May 10th and 15th 2019.

Interview Venue:
NO:107,Sidco -Aiema Tower,
1st main road,Ambattur Industrial Estate,
Chennai-600058

Please come to attend the F2F interview directly to our Institution.

Thank You.

 
 

Product Spotlight

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

HARDNESS TESTER TKM-459CE combi

TKM-459CE combi applies 2 methods of hardness control: UCI and Leeb. It provides high-accuracy tes
...
ting of metals and alloys as well as items of different sizes and configurations, their hardened layers and galvanic coatings. Device represents results in HB, HRC, HV and others. Shock-, dust- and water-proof housing with intuitive software make this gauge easy to use in all working conditions.
>

Ultrasonic Probe Recharacterization Service

NDT Systems offers a comprehensive Aftercare and Recharacterization Service for all our ultrasonic
...
probes. The Recharacterization Service is fully compliant with International ASTM E1065 Standard Guide (and other applicable standards) and offers complete documentation, traceable to the ASTM E1065 Standard. For more details or to schedule Recharacterization Services contact ndtsales@ndtsystems.com
>

Research and Application Development For NDT

Acuren’s Research and Application Development specializes in the development of advanced ultraso
...
nic inspection techniques and systems for challenging inspection applications, with an emphasis on practical solutions which are field deployable. Services include manual and automated ultrasonic inspection system development, inspection technique optimization using laboratory scale studies and ultrasonic modeling (CIVA, BeamTool), preparing technical justification for technique evaluation and qualification (Probability of Detection and sizing accuracy studies), inspection/calibration/analysis procedure preparation to support field deployment of custom techniques, and development of custom imaging algorithms to support challenging inspection applications.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window