where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

NOVO DR
develops and manufactures cutting edge Portable Digital Radiography X-ray Inspection Systems.

91 views
Technical Discussions
Sheeraz
NDT Inspector,
Pakistan, Joined Jan 2014, 3

Sheeraz

NDT Inspector,
Pakistan,
Joined Jan 2014
3
21:07 May-09-2019
ut of carbon steel shaft
Please can somebody suggest me to do UT of carbon steel shaft size of 320 dia and 4200 length. I have been told by UT inspector level 2 straight beam transducer never be used for crack detection it is only used for lamination or thickness. Is it so.
Shaft can be inspected radially and axially with straight beam or angle beam transducer.
    
 
 Reply 
 
Daniel Braun
Daniel Braun
10:11 May-10-2019
Re: ut of carbon steel shaft
In Reply to Sheeraz at 21:07 May-09-2019 .

In-service inspection - detection of transverse cracks:

http://www.sonotronndt.com/SHAFTS_BOLTS.htm

http://www.sonotronndt.com/APPLICATIONS/PA_APPS/PA_APP_STORE/ISONIC_PA_EXPERT_SHAFT.pdf

http://www.sonotronndt.com/RW_AXLE.htm

http://www.sonotronndt.com/APPLICATIONS/PA_APPS/PA_APP_STORE/ISONIC_PA_RW_AXLE_TEST.pdf

In-service inspection - detection of longitudinal cracks:

http://www.sonotronndt.com/RODSCAN.htm

http://www.sonotronndt.com/APPLICATIONS/PA_APPS/PA_APP_STORE/ISONIC_PA_ROD_Scan.pdf

Both inspection are applicable for the hollow and solid shafts








1    
 
 Reply 
 
Michel Couture
NDT Inspector,
consultant, Canada, Joined Sep 2006, 835

Michel Couture

NDT Inspector,
consultant,
Canada,
Joined Sep 2006
835
12:46 May-13-2019
Re: ut of carbon steel shaft
In Reply to Sheeraz at 21:07 May-09-2019 .

ASTM E388

    
 
 Reply 
 
Sheeraz
NDT Inspector,
Pakistan, Joined Jan 2014, 3

Sheeraz

NDT Inspector,
Pakistan,
Joined Jan 2014
3
20:10 May-15-2019
Re: ut of carbon steel shaft
In Reply to Michel Couture at 12:46 May-13-2019 .

Thank you all please share acceptance criteria for in service shaft

    
 
 Reply 
 
Daniel Braun
Daniel Braun
09:45 May-16-2019
Re: ut of carbon steel shaft
In Reply to Sheeraz at 20:10 May-15-2019 .

for the in-service inspection for fatigue transverse cracks the sensitivity setting is based on the detection of standard saw cut made from the rounded surface of the shaft at rectangle to the axis, the depth of the saw cut for each area of the shaft is defined by the local procedures and regulations, for example for the same type of railway car shaft - wheel-seat area - the depth may vary from 0.5 to 3 mm in different countries

    
 
 Reply 
 

Product Spotlight

HD-CR 35 NDT Computed Radiography System

Portable high-resolution CR scanner for all radiography applications - weld testing, profile images
...
and aerospace. No matter what type of radiographic testing you are performing, the unique TreFoc Technology of the HD-CR 35 NDT imaging plate scanner always guarantees the highest image quality.
>

Magnetic X-Ray Pipeline Crawler

Zhong Yi brand pipeline crawler is magnetic/micro-video controlled crawler with DC X ray unit inst
...
alled for checking welding of pipeline. Move steadily inside the pipeline 6''-60''diameter with speed of up to 18m/min, Max. moving diatance 5 kilometers and provide the efficient inspection of the pipeline.
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

SITEX CPSERIES

Teledyne ICM’s CPSERIES has been designed with a view to revolutionizing the handling and perfor
...
mances of portable X-Ray sets. Despite having managed to halve the weight of similar portable X-Ray generators available on the market (while continuing to provide the same power output), the SITEX CPSERIES generators feature a shutter, a laser pointer, a beryllium window, an aluminum filter and two integrated diaphragms (customized sizes are available upon request). Without compromising the robustness and reliability for which ICM products are renowned, the small size and light weight of the SITEX CPSERIES will radically change the way that you perform your RT inspections. And you will see a positive impact in terms of both quality and return on investment (ROI).
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window