where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
1036 views
Job Offers
khea
Singapore, Joined Feb 2014, 11

khea

Singapore,
Joined Feb 2014
11
10:48 Oct-01-2019
QC Inspector / Welding Inspector

Posted by Rotary Engineering Pte Ltd
Job Location: Singapore

Looking for QA/QC Inspector to be assigned in Singapore
Requirements
• Diploma /Degree in Engineering or equivalent
• Minimum 3 years in Inspection and Quality Control for Oil and gas industry.
• Certified Welding Inspector
• Experience in Inspection, Quality Control, testing and commissioning works of Construction for Power, Oil and Chemical Plants
- Knowledge in API 650 Tanks and Process Piping

Please send your CV to: Khea.Lynn@rotaryeng.com.sg

1
 
 

Product Spotlight

UCI Hardness Tester NOVOTEST T-U2

UCI hardness tester NOVOTEST T-U2 is is used for non-destructive hardness testing of: metals and
...
alloys by scales of hardness: Rockwell (HRC), Brinell (HB), Vickers (HV); non-ferrous metals, alloys of iron etc., and using five additional scales for calibration; with tensile strength (Rm) scale determines the tensile strength of carbon steel pearlitic products by automatic recalculation from Brinell (HB) hardness scale.
>

GEKKO - Portable Phased Array Testing with TFM in Real-Time

The portable phased array testing system GEKKO provides 64 parallel test channels. On creating testi
...
ng parameters the operator is assisted by the CIVA software. Due to its modular set-up the GEKKO instrument is suitable for operators of all skill levels.
>

Customized Probes and Transducers

With a strong development department and our own piezocomposite production, we accompany you from th
...
e first product idea to serial production. Our scientists are continuously researching new methods in the field of ultrasonic measurement technology. The progress achieved enables us to offer you optimal solutions.
>

Conformable wedge transducer

The conformability is obtained with a flexible membrane filled with water between the transducer and
...
the inspected component. The coupling between the membrane and the component requires a small quantity of water or couplant. The conformable wedge combines the acoustic performance of immersion technique with good coupling and low attenuation.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window