where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
2038 views
Technical Discussions
pierre lonchampt
R & D
cegelec, France, Joined Apr 2005, 3

pierre lonchampt

R & D
cegelec,
France,
Joined Apr 2005
3
08:07 Apr-08-2005
NDT for FRP pipe bonding

Hello
I'm trying to increase the reliability of NDT procedures used on FRP pipe adhesively bonded :
Glass vinylester pipes, epoxy adhesive.
Today the NDT we use is Xray, I'm investigating for a possible alternative technique. I've found some documents* about us control, but need some more infos before pursuing in this direction.
The defects we want to look for are :
(1)lack of adhesive, voids, that we want to quantify (% of voids, max size and so on).
(2) breakage of the padding.

And we need to perform this tests on-site, in difficult conditions (position of the pipes, accessibility...).

Do others techniques (US mainly ?) have arleady been applied to this kind of materials ? conditions ? with wich device ?.

Thank you for advices !

*Guidelines for NDT of GFP pie, the Norwegian Oil Industry Ass.,
AEA Tech,Generic procedure for the ultrasonic inspection of FRP composites.

PS : I'll try to upload some schemes to explain better what I mean by (1) and (2)


 
 Reply 
 
pierre lonchampt
R & D
cegelec, France, Joined Apr 2005, 3

pierre lonchampt

R & D
cegelec,
France,
Joined Apr 2005
3
09:28 Apr-08-2005
Re: NDT for FRP pipe bonding
----------- Start Original Message -----------
: Hello
: I'm trying to increase the reliability of NDT procedures used on FRP pipe adhesively bonded :
: Glass vinylester pipes, epoxy adhesive.
: Today the NDT we use is Xray, I'm investigating for a possible alternative technique. I've found some documents* about us control, but need some more infos before pursuing in this direction.
: The defects we want to look for are :
: (1)lack of adhesive, voids, that we want to quantify (% of voids, max size and so on).
: (2) breakage of the padding.
: And we need to perform this tests on-site, in difficult conditions (position of the pipes, accessibility...).
: Do others techniques (US mainly ?) have arleady been applied to this kind of materials ? conditions ? with wich device ?.
: Thank you for advices !
: *Guidelines for NDT of GFP pie, the Norwegian Oil Industry Ass.,
: AEA Tech,Generic procedure for the ultrasonic inspection of FRP composites.
: PS : I'll try to upload some schemes to explain better what I mean by (1) and (2)
------------ End Original Message ------------

[img]http://pierre/lonchampt.free.fr/docs/bond.jpg[/img]


 
 Reply 
 
pierre lonchampt
R & D
cegelec, France, Joined Apr 2005, 3

pierre lonchampt

R & D
cegelec,
France,
Joined Apr 2005
3
09:30 Apr-08-2005
Re: NDT for FRP pipe bonding

image added


 
 Reply 
 
Simon Amallraja
Director
PET Aviation Systems P Ltd, India, Joined Jul 2003, 20

Simon Amallraja

Director
PET Aviation Systems P Ltd,
India,
Joined Jul 2003
20
09:06 Apr-09-2005
Re: NDT for FRP pipe bonding
----------- Start Original Message -----------
: image added
------------ End Original Message ------------

You can contact NDT Solutions Ltd UK. Mr. Chris Hirrby qill be ablw to explain the details to you.

visit: www.ndtsolutions.com

Regards,


 
 Reply 
 
Simon Amallraja
Director
PET Aviation Systems P Ltd, India, Joined Jul 2003, 20

Simon Amallraja

Director
PET Aviation Systems P Ltd,
India,
Joined Jul 2003
20
09:06 Apr-09-2005
Re: NDT for FRP pipe bonding
----------- Start Original Message -----------
: image added
------------ End Original Message ------------

You can contact NDT Solutions Ltd UK. Mr. Chris Kirby will be able to explain the details to you.

visit: www.ndtsolutions.com

Regards,


 
 Reply 
 
Jens Rusborg
Jens Rusborg
00:40 Apr-11-2005
Re: NDT for FRP pipe bonding
Contact FORCE Technology DK. Mr Jens Rusborg will be able to help you.

Visit: www.force.dk




 
 Reply 
 
Gary
Consultant
TWI, United Kingdom, Joined May 2001, 15

Gary

Consultant
TWI,
United Kingdom,
Joined May 2001
15
09:01 Apr-12-2005
Re: NDT for FRP pipe bonding
Pierre

TWI are running many projects looking at new inspection methods in this area.

One such project, Sure2Grip is a €2m Eu funded project looking at a similar problem to the one that you descibe. The project is considering radiography, thermography, Shearography and Ultrasonics to detect discontinuities in the material and bondline.

Please contact the NDT Group at TWI.

www.twi.co.uk


----------- Start Original Message -----------
: Hello
: I'm trying to increase the reliability of NDT procedures used on FRP pipe adhesively bonded :
: Glass vinylester pipes, epoxy adhesive.
: Today the NDT we use is Xray, I'm investigating for a possible alternative technique. I've found some documents* about us control, but need some more infos before pursuing in this direction.
: The defects we want to look for are :
: (1)lack of adhesive, voids, that we want to quantify (% of voids, max size and so on).
: (2) breakage of the padding.
: And we need to perform this tests on-site, in difficult conditions (position of the pipes, accessibility...).
: Do others techniques (US mainly ?) have arleady been applied to this kind of materials ? conditions ? with wich device ?.
: Thank you for advices !
: *Guidelines for NDT of GFP pie, the Norwegian Oil Industry Ass.,
: AEA Tech,Generic procedure for the ultrasonic inspection of FRP composites.
: PS : I'll try to upload some schemes to explain better what I mean by (1) and (2)
------------ End Original Message ------------




 
 Reply 
 
Thomas Niederreiter
Thomas Niederreiter
02:59 Apr-13-2005
Re: NDT for FRP pipe bonding

I´m from a german company called Themosensorik GmbH. We are developer and producer of a test system for Wind-turbine blades with IR-FPA Array Cameras..-As well we´re producing the cameras ourselves. Maybe we can solve your measurement problmes faster and better than the already established testing systems. If you´re interessted in our skills and techniques visit our homepage and contact us by Email. Please write Your Name and NDT-NET in the Mail Subject.




 
 Reply 
 
Tim Yao
Tim Yao
02:03 Jul-19-2005
Re: NDT for FRP pipe bonding
----------- Start Original Message -----------
: : image added
: You can contact NDT Solutions Ltd UK. Mr. Chris Kirby will be able to explain the details to you.
: visit: www.ndtsolutions.com
: Regards,
------------ End Original Message ------------

Dear Sir,
Fiberglass reinforced plastic (FRP) composites are an economic solution for many of the highly corrosive environments in industry where metals just won't hold up.

Hengrun Group is a leading manufacturer of application-specific (custom) fiberglass pipe and duct systems and process vessels for corrosive industrial applications.

Premium vinyl ester and polyester resins are used, specifically formulated for corrosion resistance, high-temperature resistance and fire resistance. We can assist with design, resin selection and the many other questions you may have about fiberglass equipment.

HengRun Group




 
 Reply 
 

Product Spotlight

TESTD-PT SYSTEM

Pulse thermography is a non-contact test method that is ideal for the characterization of thin fil
...
ms and coatings or the detection of defects. With a remarquable short test time and a high detection sensitivity, the Telops TESTD-PT is the perfect tool for non- destructive testing. With such high frame rates, it is even possible to investigate highly conductive or diffusive materials.
>

AIS229 - Multipurpose Real Time System

Latest standard & automatic real time system developed by Balteau. The AIS229 has been designed to
...
do series inspection in a wide variety of industry. Composed of a shielded cabinet, 5 axis manipulator, x-ray generator and tubehead from 160kV to 225kV, a fl at panel & much more, the AIS229 is most certainly one of the most multipurpose RTR system available on the market.
>

FD800 Bench Top Flaw Detectors

The bench-top FD800 flaw detector range combines state-of-the-art flaw detection with advanced mater
...
ial thickness capabilities. Designed for use in the laboratory these gauges are the tool you need for all your flaw detecting needs.
>

Ultrasonic Testing Immersion Tanks with Unmatched Scanning Features

TecScan’s non-destructive testing Ultrasonic Immersion Tanks & scanners are designed for high pe
...
rformance and demanding NDT testing applications. Our Scan3D™ line of High Precision Immersion Tanks are specifically designed for automated ultrasonic testing of complex composites parts used in aerospace and industrial applications.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window