where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

374 views
Technical Discussions
Faran
Engineering
FFC Pakistan, Pakistan, Joined May 2005, 17

Faran

Engineering
FFC Pakistan,
Pakistan,
Joined May 2005
17
08:26 May-12-2005
ECT Equipment: Purchase and Questions

we need to purchase a eddy current testing equipment & also devolop its skill. any one who has recently gone through this phase pls share his experince regarding choice of the equipment, what are basic parameters that should be addressed & known by us, in order to adopt this technique for effectively monitoring corrosion in tubes of heat exchangers , material of tubes being, Carbon steel, low alloy steel, Stainless Steel, Titanium.

We need to inspect the thickness of the Zr lining having a nominal thickness of 0.7 mm, in a 25-22-2 Ni-Cr-Mo tube of thickness 2mm.

1. which Eddy current equipment is best for thi? Qutations are also invited along with brochures.

2. If someone has alreaady performed it were the results satisfactory, what type of probe & frequencies are useful?

3. Is it neccesary to use multiple frequencies to get better & reliable results. Does the use of multiple frequencies more complex in analysis?

4. How much reliable is Eddy current testing in inspection of exchanger tubes of following material
O.D Wall thk Tube Matrl
27mm 3.5mm SB 338 Gr.3 (Titanium)
¾ inch 2.11 mm 25-22-2 Cr-Ni-Mo (SS)
2 inch 2.11 mm A213 TP 316L (SS)
19mm 2.11mm A209 T1 (low alloy Steel)

is the technique eqaully good for carbon steel

Pls reply me at faranffc@yahoo.com


 
 Reply 
 

Product Spotlight

OmniScan™ X3 flaw detector

The OmniScan X3 flaw detector is a complete phased array toolbox. Powerful tools, like total focus
...
ing method (TFM) images and advanced visualization capabilities, enable you to complete your inspection with greater confidence.
>

TESTD-PT SYSTEM

Pulse thermography is a non-contact test method that is ideal for the characterization of thin fil
...
ms and coatings or the detection of defects. With a remarquable short test time and a high detection sensitivity, the Telops TESTD-PT is the perfect tool for non- destructive testing. With such high frame rates, it is even possible to investigate highly conductive or diffusive materials.
>

UCI Hardness Tester NOVOTEST T-U2

UCI hardness tester NOVOTEST T-U2 is is used for non-destructive hardness testing of: metals and
...
alloys by scales of hardness: Rockwell (HRC), Brinell (HB), Vickers (HV); non-ferrous metals, alloys of iron etc., and using five additional scales for calibration; with tensile strength (Rm) scale determines the tensile strength of carbon steel pearlitic products by automatic recalculation from Brinell (HB) hardness scale.
>

Ultrasonic Squirter/Gantry System

TecScan’s NDT Ultrasonic Gantry Systems are industrial Squirter scanners designed for non-destru
...
ctive quality testing and raster scanning of large structures and parts. The Gantry Systems are usually composed of an Industrial Mechanical Scanner and a Control Room with System Workstation.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window