where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
1195 views
Technical Discussions
Tim Anderson
NDT Inspector,
Eclipse Sientific Products Inc., Canada, Joined Aug 2005, 2

Tim Anderson

NDT Inspector,
Eclipse Sientific Products Inc.,
Canada,
Joined Aug 2005
2
08:47 Aug-16-2005
Acoustic emission equipment for boom truck inspection

I am looking for help in finding the names of companies that produce/sell acoustic emission equipment (available in North America) designed to inspect the fiberglass booms of bucket/boom trucks. So far I've only been able to discern one company as actually listing equipment configured for boom truck inspection, PAC in New Jersey. I'm interested in any AE equipment packages that can be configured to do fiberglass boom truck inspections.

(Please ignore my similar posting in the General Discussions forum it was inadvertantly posted in that forum by mistake.)

Thank You
Tim Anderson



 
 Reply 
 
Mark Carlos
Engineering, -
MISTRAS Products & Systems, USA, Joined Mar 2002, 4

Mark Carlos

Engineering, -
MISTRAS Products & Systems,
USA,
Joined Mar 2002
4
03:00 Aug-19-2005
Re: Acoustic emission equipment for boom truck inspection
Tim, as you mention, Physical Acoustics would be happy to help you. PAC has specific products and software that address the bucket truck testing market. The ADTIwin software is specifically configured to carry out tests on fiberglass boom trucks and follows ASTM F914, F1430 and F1797 AE testing procedures. Call 609-716-4000 for assistance. Regards

----------- Start Original Message -----------
: I am looking for help in finding the names of companies that produce/sell acoustic emission equipment (available in North America) designed to inspect the fiberglass booms of bucket/boom trucks. So far I've only been able to discern one company as actually listing equipment configured for boom truck inspection, PAC in New Jersey. I'm interested in any AE equipment packages that can be configured to do fiberglass boom truck inspections.
: (Please ignore my similar posting in the General Discussions forum it was inadvertantly posted in that forum by mistake.)
: Thank You
: Tim Anderson
------------ End Original Message ------------




 
 Reply 
 

Product Spotlight

ISONIC 3510

Very Powerful Superior Performance Extremely Portable Smart Phased Array Ultrasonic Flaw Detector an
...
d Recorder with 2 Conventional UT and TOFD Channels uniquely combines PA, single- and multi-channel conventional UT, and TOFD modalities providing 100% raw data recording and imaging. Suitable for all kinds of every-day ultrasonic inspections
>

Magnetic X-Ray Pipeline Crawler 6''-60''

Suitable to work in 6''-60''diameter with speed of up to 18m/min, Max. moving diatance 5 kilometer
...
s and provide the efficient inspection of the pipeline.
>

GUL QSR1® Scanning

How do you measure pipe wall thickness without direct access to the area? QSR® Scanning - Guide Wav
...
e Quantitative Short Range Scanning.
>

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window