where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
511 views
Technical Discussions
Zeki Cosku Gokce
Zeki Cosku Gokce
04:48 Oct-31-2005
Ultrasonic inspection of as-cast products

What is the best wavemode, frequency, sensor diameter to look for longitudinal cracks and shroud porosity on as-cast products such as slabs and billets from a steel mill? we are trying to inspect a 150mm square billet but cannot see the backwall reflection (there seems to be a lot of scattering). Any ideas?


 
 Reply 
 
A.A.AMIRI
Consultant, NDT/QC/WELD INSPECTION
Iran, Joined Nov 2005, 20

A.A.AMIRI

Consultant, NDT/QC/WELD INSPECTION
Iran,
Joined Nov 2005
20
05:38 Nov-01-2005
Re: Ultrasonic inspection of as-cast products
----------- Start Original Message -----------
DEAR FRIEND,
I THINK FOR YOUR TEST CONDITION,NORMAL PROBE WITH OVER 24mm.Dia.(LONGITUDINAL WAVE),0.25-1 MHZ FREQUENCY IS
WELL.YOU CAN ON-REGECT SWITCH FOR OMITTED OR DECREASE NOISE ON DISPLAY(CRT/LCD).HIGH DAMP PROBE MAY HELP YOU
FOR PREVENT OF NOISE EFFECTS.


 
 Reply 
 

Product Spotlight

PROlineTOP Plug & Play Ultrasonic inspection device

As Plug & Play solution it units all control and operation elements in a small housing and therefo
...
re replaces the typical control cabinet...
>

Wireless TOFD scanner

Quick, accurate and highly reproducible welds testing. The System operates wirelessly and is compat
...
ible with any type of Windows based Laptop, Desktop or Tablet.
>

Lyft™: Pulsed Eddy Current Reinvented

PEC Reinvented—CUI Programs Redefined Corrosion under insulation (CUI) is possibly the greatest u
...
nresolved asset integrity problem in the industry. Current methods for measuring wall thickness with liftoff, without removing insulation, all have severe limitations. Eddyfi introduces Lyft — a reinvented, high-performance pulsed eddy current (PEC) solution. The patent- pending system features a state-of-the-art portable instrument, real- time C-scan imaging, fast data acquisition with grid-mapping and dynamic scanning modes, and flexibility with long cables. It can also scan through thick metal and insulation, as well as aluminum, stainless steel, and galvanized steel weather jackets. Who else but Eddyfi to reinvent an eddy current technique and redefine CUI programs. Got Lyft?
>

NEW! The PragmaPro Instrument Platform

The PragmaPro is based on a modular cartridge technology and supports various NDT instrument modal
...
ities such as UT, PAUT, ECT and many more. This new platform is based on a machined, powder-coated aluminum frame for shock-proofness, best sealing qualities and maximum heat dissipation. This is practical to extend the outdoor temperature range and/or to extend the power injected in the transducers. The PragmaPro is aiming at a very wide range of applications, such as weld scanning, corrosion mapping and composite testing.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window