where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
1299 views
Technical Discussions
Kaveh
Kaveh
07:12 Nov-14-2005
DWDI or DWSI

Dear friends

How are techniques (DWDI or DWSI) selected for radiography of pipes. What is the oponion of standards in this case?

Regards
Kaveh


 
 Reply 
 
A-A-Amiri
Consultant, NDT/QC/WELD INSPECTION
Iran, Joined Nov 2005, 20

A-A-Amiri

Consultant, NDT/QC/WELD INSPECTION
Iran,
Joined Nov 2005
20
05:45 Nov-15-2005
Re: DWDI or DWSI
----------- Start Original Message -----------
: Dear friends
If your intent is criteria for technique selection,in ASME sec.v you can find recommendation for DWDI technique selection as per pipe OD.(Less than 3.5 inches).For DWSI,You can apply up to obtain necessary quality included time loss&cost.

About your idea for Min. applicable UT thickness,your comment is very exactly but my intended was for COMMON UT METHOD which is mobile pulse echo contact method for welding,forging,in shop plate check(over 12.5 mm thk.) & casting .

Regards,
------------ End Original Message ------------




 
 Reply 
 

Product Spotlight

FD800 Bench Top Flaw Detectors

The bench-top FD800 flaw detector range combines state-of-the-art flaw detection with advanced mater
...
ial thickness capabilities. Designed for use in the laboratory these gauges are the tool you need for all your flaw detecting needs.
>

Customized Probes and Transducers

With a strong development department and our own piezocomposite production, we accompany you from th
...
e first product idea to serial production. Our scientists are continuously researching new methods in the field of ultrasonic measurement technology. The progress achieved enables us to offer you optimal solutions.
>

IRIS 9000Plus - Introducing the next generation of heat exchanger inspection.

Representing the seventh generation of the IRIS system, the IRIS 9000 Plus has nearly 200 years of c
...
ombined field inspection experience incorporated in its design. This experience combined with a strong commitment to quality and a history of innovation has made Iris Inspection Services® the undisputed leader in IRIS technology.
>

Panther

M2M PANTHER is a phased-array equipment designed for both desktop and industrial applications, offer
...
ing unparalleled performance in a compact unit. It combines the speed required for industrial integrated Phased-Array Ultrasound (PAUT) solutions, with the most complete set of total focusing method (TFM) imaging techniques, making it the ultimate tool for R&D and procedure qualification.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window