where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

989 views
Technical Discussions
John James
Self Employed, Australia, Joined Jun 2005, 3

John James

Self Employed,
Australia,
Joined Jun 2005
3
04:51 Dec-22-2005
Automatic Eddy Curent Tube Inspection Analysis Software

Recently i have heard of several companies using automated analysis software for data analysis of ECT tube data.

Is there software like this in the market place? From my experience there is to many variables and scenarios i believe for effective and accurate software for this function.

Any comments

Regards



 
 Reply 
 
Joe Buckley
Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT, United Kingdom, Joined Oct 1999, 528

Joe Buckley

Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT,
United Kingdom,
Joined Oct 1999
528
03:35 Dec-23-2005
Re: Automatic Eddy Curent Tube Inspection Analysis Software

There have been many attempts at this over the years, I first came across the (then) purely amplitude based DRECT system, developed by the then CEGB in the UK, around 1980. This evolved through a number of iterations, and the current ARTIST system can probably be regarded as its heir.

In the USA a nummber of companies (particularly Zetec) have deveoped systems which can provide automated screening of tube results based on a wide range of evaluation algorithms nd criteria

That is the point. These systems should be regarded as a screening tool, They will tell you this tube is fine, and this one is scrap, but in between is a whole grey area, You have to be either very conservative or willing to manually evaluate a fair number of 'marginal' applications.

But these days you normally need to log all the data anyway, and the extra processing for the screening does not add too much of a cost or time overhead. By eliminating 'clean tubes' and identifying the critical indications you can save a lot of time, and reduce operator fatigue and error.

Well worth considering if you test a lot of tubes.

Joe


----------- Start Original Message -----------
: Recently i have heard of several companies using automated analysis software for data analysis of ECT tube data.
: Is there software like this in the market place? From my experience there is to many variables and scenarios i believe for effective and accurate software for this function.
: Any comments
: Regards
------------ End Original Message ------------




 
 Reply 
 
Franc Buijsen
Franc Buijsen
01:19 Dec-27-2005
Re: Automatic Eddy Curent Tube Inspection Analysis Software
----------- Start Original Message -----------
: Recently i have heard of several companies using automated analysis software for data analysis of ECT tube data.
: Is there software like this in the market place? From my experience there is to many variables and scenarios i believe for effective and accurate software for this function.
: Any comments
: Regards

Corestar in the US has very strong software for this application in combination with their Omni 100 or Omni 200 Eddy current system.

For more info you can contact me at +31 165 552461 or look on their web site.

Franc


------------ End Original Message ------------




 
 Reply 
 

Product Spotlight

NEW - TD Focus-ScanRX

The NEW Next Generation Advanced UT platform, TD Focus ScanRX - Also available as a card stack solut
...
ion. Key Improvements 1. Data acquisition is significantly faster than current design 2. Better aesthetic – closely aligns with HandyScan RX 3. Improved IP rating (Target IP66) 4. Ruggedized housing 5. Connectors are protected from impact and ingress 6. Integrated stand and separate retractable handle easy to keep clean) 7. Touchscreen with ruggedized display glass 8. 3-Axis encoder input
>

Eddy Current inspection : RotoETscan Rotating Head

The rotating head RotoETscan detects the presence of longitudinal surface or sub surface defects a
...
t high speed. The rotating head is often installed directly on the production line. It is generally dedicated to the control of long products such as tubes, bars and wires, made of ferrous or non-ferrous material. It can also be used for inspection of small parts (billets).
>

UCI Hardness Tester NOVOTEST T-U2

UCI hardness tester NOVOTEST T-U2 is is used for non-destructive hardness testing of: metals and
...
alloys by scales of hardness: Rockwell (HRC), Brinell (HB), Vickers (HV); non-ferrous metals, alloys of iron etc., and using five additional scales for calibration; with tensile strength (Rm) scale determines the tensile strength of carbon steel pearlitic products by automatic recalculation from Brinell (HB) hardness scale.
>

FD800 Bench Top Flaw Detectors

The bench-top FD800 flaw detector range combines state-of-the-art flaw detection with advanced mater
...
ial thickness capabilities. Designed for use in the laboratory these gauges are the tool you need for all your flaw detecting needs.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window